Samsung RL44ECIH1/EUR manual Reversing the Door Swing, Not provided, Door is firmly closed

REVERSING THE DOOR SWING

-Read these instructions completely and carefully

•Before reversing the door, ensure first that the refrigerator is disconnect by the plug from the mains. You should take out contents and accessories like door guard from

the doors. Be careful not to drop the doors during disassembling or assembling.Warning

1.Handle parts carefully to avoid scratching the paint.

2.Lay out all the screws by their related parts to avoid using them in the wrong places.

3.Provide a non-scratching work surface for the doors. (ex:blanket)

4.During door reversing, refrigerator should not be stained with oil.

5.We recommend to use tools descrided below. (Possible to use simliar size of socket wrench & wrench)

Not provided Additional part

Phillips Head	Flat Head	10mm	11mm	Allen Wrench	Cover Wire
		Socket Wrench	Wrench	(3/16inch)	Hinge L
Driver (+)	Driver (-)
		(for bolts)	(for hinge shaft)	(for Mid hinge)	(In Top Cover)

-DISASSEMBLY OF THE FRIDGE DOOR

These operating instructions cover various models.

The characteristics of your appliance may differ slightly from those described in this instructions.

1. Disassemble the CAP CABI	2. Disconnect electric wires	3. Remove 3 bolts on the top
after removing 2 screws.	inside of the CAP CABI.	of the refrigerator with 10mm
		socket wrench. Make sure the
		door is firmly closed.
CAP CABI

4.Disassemble the Fridge door by lifting it upward.

Be careful not to drop and scratch the face of the Fridge door.

5.Disassemble the COVER WIRE DOOR on the top of the fridge door with a flat- head screw driver by putting it into the indicated position(∆).

COVER WIRE DOOR

6.Disjoin the COVER WIRE HINGE R from the ASSY HINGE UPP as shown. Take out the electric wire from the

COVER WIRE HINGE R.

COVER WIREHINGE R

ASSY HINGE UPP

15