Samsung LC49J890DKUXEN manual Tidying Up the Connected Cables, Headphones hanger Downward Upward

Page 28

Tidying Up the Connected Cables

: Headphones hanger

: Downward

: Upward

1

2

3

4

5

Connect the corresponding cables.	Arrange the cables against the bend	Push the COVER STAND BODY REAR in
	tendency of the cables and pull the	the direction as shown in the figure.
	cables out of the COVER-REAR SUB
	grooves.
6	7	8

Attach the COVER STAND BODY REAR in	Move down the COVER STAND BODY	Adjust the set height, if required.
the direction as shown in the figure with	REAR until it covers the stand neck
the buckles not being exposed.	completely.

Remove the COVER STAND BODY REAR by pulling it in the direction as shown in the figure.

Place the corresponding cables into the stand-neck holder. Do not stretch the cable. Three cables in one holder is recommended.

9

Hang the HOLDER-CABLE in the direction as shown in the figure.

10

11

12

Arrange the cables against their bend	Open the Headset Hanger by pushing it Hang the headset.
tendency, and then pull them through	down.
the HOLDER-CABLE hangers. When
the set height is changed, you need
to arrange the cables and pull them
through the HOLDER-CABLE hangers
again.

13

Rotate and then push up the Headset	Caution
Hanger in the directions as shown in the	Open the COVER-REAR SUB in the
figure.	direction as shown in the figure.
	direction as shown in the figure.

28

Image 28

Contents C49J890DK Table of contents PIP/PBP Before Using the Product Securing the Installation SpaceSafety Precautions Precautions for storageCleaning Electricity and SafetyWipe the monitor with a clean, soft and dry cloth Power on the product and computerInstallation Operation Page Parts PreparationsControl Panel This LED is power status indicator and works as Adjust VolumeDirect Key guide Display Function Key GuideFunction Key Guide ReturnMove the option Exit the Main menuClose Sublist without saving value Value decreases in the sliderChanging Brightness, Contrast and Eye Saver Mode settings Changing the Volume settingTypes of Ports PortDescriptionUpgrading the Software via USB Software upgrading proceedsMake sure only the BIN file for upgrade is in the USB disk Copied to the root directoryAdjusting the Product Tilt and Height +4˚Anti-theft Lock To lock an anti-theft locking deviceInstallation Attaching the Stand Type onePlace the stand neck on the monitor as Attaching the Stand Type twoNeck in the direction as shown Remove the package Removing the Stand For Attaching the Bracket Wall Lift the COVER-REAR TOP Disassemble the COVER-REAR TOPAttaching the Bracket Wall Attach the Bracket Wall hereConnecting and Using a Source Device Read below before installing the monitorConnecting and Using a Source Device Connection Using the Hdmi CableConnection Using the DP Cable Connection Using the USB Type-C CableConnecting to Headphones Connecting the Product to a Source Device as a USB HubConnecting a Source Device to the Product Utilizing the Product as a USB HUB Connecting the Power PowerTidying Up the Connected Cables Headphones hanger Downward UpwardArrange the cables against the bend Setting Optimum Resolution Driver InstallationCorrect posture to use the product Samsung Magic Bright PictureYou can customize the brightness to suit your preferences Brightness ContrastSharpness ColorSamsung Magic Upscale Eye Saver ModeHdmi Black Level Screen Adjustment Picture SizeCalibration Report Change the picture sizePIP/PBP Mode Enable or disable the PIP/PBP Mode functionSize Aspect RatioPosition Sound SourceSource Select the source for each screenSwitch USB MonitorMobile Phone LaptopSelect the image size for sub-screen Set the Picture Size for each of the divided screensAdjust the contrast level for sub-screen Adjust the contrast level for each screenOnScreen Display TransparencyLanguage Display TimeUSB Source Setup Hdmi ModeSystem DisplayPort VerOff Timer Plus PC/AV ModeSmart ECO Saving Off Deactivate the Smart ECO Saving functionPower LED On Reset AllSource Detection InformationInstalling the Software Easy Setting BoxRestrictions and Problems with the Installation System RequirementsTroubleshooting Guide Testing the ProductChecking the Resolution and Frequency Check that the power cable is connected properlyChange the Color settings Check the cable connection to the productUniversal Serial Bus USB issue Set the frequency on your graphics card Specifications GeneralStandard Signal Mode Table 106.500 60.000 108.000 +/+60.000 148.500 +/+ 266.500Responsibility for the Pay Service Cost to Customers Product damage caused by customers faultAppendix Not a product defectExtended warranty

Related manuals

Manual 53 pages 49.45 Kb

Manual 53 pages 47.65 Kb

Manual 52 pages 10.39 Kb