Samsung LC49J890DKIXCI, LC49J890DKUXEN Correct posture to use the product, Driver Installation

Page 29

Correct posture to use the product

Use the product in the correct posture as follows:

•• Straighten your back.

•• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen.

•• Keep your eyes directly in front of the screen.

•• Adjust the angle so light does not reflect on the screen.

•• Keep your forearms perpendicular to your upper arms and level with the back of your hands.

•• Keep your elbows at about a right angle.

•• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.

•• Do the Eye excercises or blink frequently,then eye fatigue will be relieved.

Driver Installation

――You can set the optimum resolution and frequency for this product by installing the corresponding drivers.

――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com.

Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.

Select a language on the product and change the resolution on your PC to the optimum setting.

――If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again.

――The optimum resolution can also be selected in Control Panel on your PC.

29

Image 29
Contents C49J890DK Table of contents PIP/PBP Securing the Installation Space Before Using the ProductSafety Precautions Precautions for storageElectricity and Safety CleaningWipe the monitor with a clean, soft and dry cloth Power on the product and computerInstallation Operation Page Control Panel PreparationsParts Adjust Volume This LED is power status indicator and works asDirect Key guide Display Function Key GuideReturn Function Key GuideExit the Main menu Move the optionClose Sublist without saving value Value decreases in the sliderChanging the Volume setting Changing Brightness, Contrast and Eye Saver Mode settingsPortDescription Types of PortsSoftware upgrading proceeds Upgrading the Software via USBCopied to the root directory Make sure only the BIN file for upgrade is in the USB disk+4˚ Adjusting the Product Tilt and HeightTo lock an anti-theft locking device Anti-theft LockAttaching the Stand Type one InstallationNeck in the direction as shown Remove the package Attaching the Stand Type twoPlace the stand neck on the monitor as Lift the COVER-REAR TOP Disassemble the COVER-REAR TOP Removing the Stand For Attaching the Bracket WallAttach the Bracket Wall here Attaching the Bracket WallRead below before installing the monitor Connecting and Using a Source DeviceConnecting and Using a Source Device Connection Using the Hdmi CableConnection Using the USB Type-C Cable Connection Using the DP CableConnecting a Source Device to the Product Connecting the Product to a Source Device as a USB HubConnecting to Headphones Utilizing the Product as a USB HUB Power Connecting the PowerArrange the cables against the bend Headphones hanger Downward UpwardTidying Up the Connected Cables Correct posture to use the product Driver InstallationSetting Optimum Resolution You can customize the brightness to suit your preferences PictureSamsung Magic Bright Contrast BrightnessSharpness ColorHdmi Black Level Eye Saver ModeSamsung Magic Upscale Picture Size Screen AdjustmentCalibration Report Change the picture sizeEnable or disable the PIP/PBP Mode function PIP/PBP ModeAspect Ratio SizePosition Sound SourceSelect the source for each screen SourceMonitor Switch USBMobile Phone LaptopSet the Picture Size for each of the divided screens Select the image size for sub-screenAdjust the contrast level for each screen Adjust the contrast level for sub-screenTransparency OnScreen DisplayLanguage Display TimeHdmi Mode USB Source SetupSystem DisplayPort VerPC/AV Mode Off Timer PlusSmart ECO Saving Off Deactivate the Smart ECO Saving functionReset All Power LED OnSource Detection InformationEasy Setting Box Installing the SoftwareRestrictions and Problems with the Installation System RequirementsTesting the Product Troubleshooting GuideChecking the Resolution and Frequency Check that the power cable is connected properlyCheck the cable connection to the product Change the Color settingsUniversal Serial Bus USB issue Set the frequency on your graphics card General SpecificationsStandard Signal Mode Table 60.000 108.000 +/+ 106.50060.000 148.500 +/+ 266.500Product damage caused by customers fault Responsibility for the Pay Service Cost to CustomersAppendix Not a product defectExtended warranty
Related manuals
Manual 53 pages 49.45 Kb Manual 53 pages 47.65 Kb Manual 52 pages 10.39 Kb