Samsung LC49J890DKUXEN Move the option, Exit the Main menu, Close Sublist without saving value

Page 12

When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.

JOG Button	Power saving/Non-signal mode

UP	Source Change

Down

PRESS(ENTER) for 2 seconds	Power Off

When the monitor displays the Main menu the JOG Button could be used as below.

	JOG Button	Action

	UP/DOWN	Move the option

		Exit the Main menu.
	LEFT	Close Sublist without saving value.
		Value decreases in the slider.

	RIGHT	Move to next depth.
	RIGHT	Value increases in the slider.
		Value increases in the slider.

	PRESS(ENTER)	Move to next depth.
	PRESS(ENTER)	Save the value and close Sublist.
		Save the value and close Sublist.

Image 12

Samsung LC49J890DKUXEN manual Move the option, Exit the Main menu, Close Sublist without saving value, Move to next depth

Contents C49J890DK Table of contents PIP/PBP Before Using the Product Securing the Installation SpaceSafety Precautions Precautions for storageCleaning Electricity and SafetyWipe the monitor with a clean, soft and dry cloth Power on the product and computerInstallation Operation Page Preparations PartsControl Panel This LED is power status indicator and works as Adjust VolumeDirect Key guide Display Function Key GuideFunction Key Guide ReturnMove the option Exit the Main menuClose Sublist without saving value Value decreases in the sliderChanging Brightness, Contrast and Eye Saver Mode settings Changing the Volume settingTypes of Ports PortDescriptionUpgrading the Software via USB Software upgrading proceedsMake sure only the BIN file for upgrade is in the USB disk Copied to the root directoryAdjusting the Product Tilt and Height +4˚Anti-theft Lock To lock an anti-theft locking deviceInstallation Attaching the Stand Type oneAttaching the Stand Type two Place the stand neck on the monitor asNeck in the direction as shown Remove the package Removing the Stand For Attaching the Bracket Wall Lift the COVER-REAR TOP Disassemble the COVER-REAR TOPAttaching the Bracket Wall Attach the Bracket Wall hereConnecting and Using a Source Device Read below before installing the monitorConnecting and Using a Source Device Connection Using the Hdmi CableConnection Using the DP Cable Connection Using the USB Type-C CableConnecting the Product to a Source Device as a USB Hub Connecting to HeadphonesConnecting a Source Device to the Product Utilizing the Product as a USB HUB Connecting the Power PowerHeadphones hanger Downward Upward Tidying Up the Connected CablesArrange the cables against the bend Driver Installation Setting Optimum ResolutionCorrect posture to use the product Picture Samsung Magic BrightYou can customize the brightness to suit your preferences Brightness ContrastSharpness ColorEye Saver Mode Samsung Magic UpscaleHdmi Black Level Screen Adjustment Picture SizeCalibration Report Change the picture sizePIP/PBP Mode Enable or disable the PIP/PBP Mode functionSize Aspect RatioPosition Sound SourceSource Select the source for each screenSwitch USB MonitorMobile Phone LaptopSelect the image size for sub-screen Set the Picture Size for each of the divided screensAdjust the contrast level for sub-screen Adjust the contrast level for each screenOnScreen Display TransparencyLanguage Display TimeUSB Source Setup Hdmi ModeSystem DisplayPort VerOff Timer Plus PC/AV ModeSmart ECO Saving Off Deactivate the Smart ECO Saving functionPower LED On Reset AllSource Detection InformationInstalling the Software Easy Setting BoxRestrictions and Problems with the Installation System RequirementsTroubleshooting Guide Testing the ProductChecking the Resolution and Frequency Check that the power cable is connected properlyChange the Color settings Check the cable connection to the productUniversal Serial Bus USB issue Set the frequency on your graphics card Specifications GeneralStandard Signal Mode Table 106.500 60.000 108.000 +/+60.000 148.500 +/+ 266.500Responsibility for the Pay Service Cost to Customers Product damage caused by customers faultAppendix Not a product defectExtended warranty

Related manuals

Manual 53 pages 49.45 Kb

Manual 53 pages 47.65 Kb

Manual 52 pages 10.39 Kb

JOG Button

Power saving/Non-signal mode

JOG Button

Action

UP/DOWN

Move the option

Exit the Main menu.

Close Sublist without saving value.

Value decreases in the slider.

Move to next depth.

Value increases in the slider.

Save the value and close Sublist.