Samsung LC49J890DKUXEN manual Attaching the Stand Type two, Place the stand neck on the monitor as

Attaching the Stand (Type two)

――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.

: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.

1 12 13 14

Caution	Place the stand neck on the monitor as	Fasten the screws at the top of the
Hold the stand neck with both hands,	shown in the figure.	stand neck.
not one hand, to prevent it from falling
off and causing injury.
15	61	71

Assemble the COVER-REAR TOP to the	Rotate the COVER-REAR TOP clockwise. Stand up the monitor as shown in the
stand neck as shown in the figure.	figure.

Insert the stand base into the stand	Disassemble the COVER-REAR TOP.
neck in the direction as shown in the
figure.
81

Remove the package.

20