Crestron electronic GLPS-HSW-FT, IPAC-GL1 Medium 70 x 20-1/4 x 6-5/8 in 177.8 x 51.4 x 16.8 cm

Page 23

Crestron Commercial Lighting Design Guide

Green Light Power Switching

GLPS-SW (CONTINUED)

SPECIFICATIONS

Load Ratings

Switch Channels: 10 to 42 depending upon panel size and options, each channel

phase-independent

Maximum per Channel: 16 Amps @ 100 to 277 Volts AC, 50/60 Hz; 1 HP @ 120 Volts,

2 HP @ 277 Volts

Switched Load Types: Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Lamp Ballast, High-Intensity Discharge, Motors

Dimmed Load Types (special order): 0-10 Volt 4-Wire Dimmable Fluorescent Ballast

Rated Relay Lifetime: 10,000 cycles at full rated electronic ballast load

Input Power

Line Power:120/208 VAC, 225 Amps maximum, 50/60 Hz phase-to-neutral, or 277/480 VAC, 250 Amps maximum, 50/60 Hz phase-to-neutral

Cresnet Power Usage (optional): 50 Watts (2.08 Amps @ 24 Volts DC) per panel, use Crestron GLA-PWS50 or equivalent power supply

Circuit Breakers

Branch, 120V: 20A Square D® QOB Bolt-on type; 10k, 22k, or 65k AIC rated as required

Branch, 277V: 20A Square D® EDB, EGB, EJB E-Frame type; 18k, 35k, or 65k AIC rated as required

Main, 120/208V (optional): 120/208V: 60A, 80A, or 100A Square D® QOB Bolt-on type; 10k AIC rated (consult Crestron for additional options)

Main, 277/480V (optional): 60A, 80A, 100A, or 125A Square D® EDB, EGB,

EJB E-Frame type; 18k, 35k, or 65k AIC rated

Lightning Protection

Can withstand 6 kV / 3 kA surge, as per IEC 61000-4-5 and ANSI/IEEE C62.41-1991

Enclosure

NEMA Type 1, IP20 rated protection, for indoor use only Back Box: 16 Gauge galvanized steel, surface wall mount Front Cover: 16 Gauge steel, grey powder coat finish

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Dimensions

Small: 37-1/2 x 20-1/4 x 6-5/8 in (95.25 x 51.4 x 16.8 cm)

HWD

Medium: 70 x 20-1/4 x 6-5/8 in (177.8 x 51.4 x 16.8 cm)

HWD

Large: 78-15/16 x 20-1/4 x 6-5/8 in (200.5 x 51.4 x 16.8 cm)

HWD

Weight

Fully loaded with modules, 277V circuit breakers, and wiring: Small: 70 lb (31.8 kg) maximum

Medium: 140 lb (63.5 kg) maximum

Large: 165 lb (74.9 kg) maximum

Testing & Compliance

UL Listed, FCC Part 15

Doc. 4775A

19

Image 23
Contents Crestron Green Light Commercial Lighting Design Guide Page Contents Page Or any other Crestron software IntroductionCrestron Green Light Or automatic load shedding Single Solution Control System- Crestron ExclusiveCrestron Control Technology System Design Lighting System Design Types Wireless SystemsCentralized Wired Systems System Design Crestron Commercial l Lighting Design Guide Decentralized Wired SystemsHybrid Systems Load Schedule Specifying a Lighting SystemRequired Load Schedule Items Example Load Schedule with Panel Terminations Complete diagram is available on line atSteps to order a lighting system Commercial Lighting Wiring PlanEquipment List Specification Ordering a Crestron Commercial Lighting SystemSystem Features Green Light Power SwitchingCan be programmed without ever having to connect a computer Green Light Power Switching GLPS-HSW-MLO-30-120-10K -ND FrontAvailable for 277V only Main lug onlyMCB100 MCB125Specifications 125 Glps SW MLO 30 120 10K ND100 GLPS-SW-MLO Large 78-15/16 x 20-1/4 x 6-5/8 in 200.5 x 51.4 x 16.8 cm Medium 70 x 20-1/4 x 6-5/8 in 177.8 x 51.4 x 16.8 cmModel Numbers GLPS-HSW-FT GLPS-SW-FTGreen Light Express Feed Specifications Load Ratings Small 8, 16 Large 32, 40, 48 Glps Hdsw FT Glps Relay Type Feed Type Number of CktsLoad Ratings GLPS-HDSW-FTDoc.4775A Ethernet Sdram 32 MB Nvram 1 MBGLA-PWS50 Wall Mount 50 Watt Cresnet Power SupplyGLS-PLS 120/277 Power Loss SensorDimensions Dimensions GLEP-HSW & GLEP-SW Large Panel GLEP-HSW & GLEP-SW Extra Large Panel GLEP-HSW-FT, GLEP-SW-FT, & GLEP-HDSW-FT Panels IPAC-GL1 CAEN- Series Enclosures Green Light OptionsCrestron Commercial Lighting Design Guide Caen Enclosures SpecificationsCaen 4X2 Framing Caen InstallationCaen Enclosure Framing Caen 2X1, 4X1, and 7X1 FramingCaen Wiring Universal Mounting Plates Cover Extension Kits Dimensions are provided in inchesCLX Lighting Control Modules Model Load Rating CLX-Series Lighting Control ModulesTerminal Blocks and Modules Single Width Enclosure Mounting Module InstallationCresnet Terminal Block for Caen Automation Enclosures Green Light Options-CAEN Enclosures Crestron DIN Rail Products FeaturesDIN Rail Installation Example DIN Rail System DIN-AP2 Short Circuit Protection Phase-Synchronous Detection CircuitryDIN-1DIMU4 Auto Load DetectionDIN-2MC2 DIN-8SW8DIN-4DIMFLV4 Versiports DIN-AO8DIN-IO8 Analog OutputsCresnet Distribution Cresnet Power DistributionDIN-BLOCK DIN-PWS50 3-segment Cresnet hub  32 Cresnet devices per segment DIN-HUBInterface Equipment Tpmc Isys I/O with Crestron Home or QuickMedia Wall Mount TouchpanelsTPS Series Isys TPS Isys G-Series with Crestron Home or QuickMediaTPS-4L TPS-4000LTPMC-8L TPS-4000 Tilt TouchpanelsTPMC-4XG Tpmc Series Isys i/O WiFi TouchpanelsTPMC-8T TPMC-8XML-600 Wireless Touchpanels and HandheldsTPS-6X MT-1000CC2N-DB Mounting KeypadsC2N-DB Series Decorator Keypads Mounting in Single-Gang Box  Each keypad requires 3 watts of powerCNX Designer Series Keypads Cameo Do not use the C2N-CB with the decorator-style keypads Cameo Mounting Options Cameo Flush MountMud Ring Mount Kit ILux Integrated Lighting Control System ILux Features Wireless iLux Remote Multi-Unit Expansion Stand-alone Master with Slave wiringControl System Integration Supports incandescent, magnetic low voltage Supports 3-wire Fluorescent Fluorescent DimmingILux Expansion Modules Model Load FunctionExpansion Modules Wiring Diagrams Wall Box Dimmers and Switches Cresnet Wall Box Dimmers Model Load FeaturesCLW-SLVS Cresnet Wall Box SwitchesInfiNET Wireless Technology InfiNET Dimmers, Switches, and Thermostat Example infiNET system PAC2 Lighting Control Processor Control ProcessorsPAC2 Power Management & Requirements Series Control System PAC2M Professional Automation Mini Control SystemOverride Basic Lighting System Interconnections Occupancy and Photocell Sensors C2N-SSC-2 Integrated Shade and Drape ControllersC2N-SDC C2N-SDC-DCIntegrated Systems Integrated Partner ModulesRoomView Server Edition Appendix a RoomView Remote Asset Management Tracking of projector lamp life in bar graph format Appendix aExample RoomView Server Edition reports RoomView Express Green Light Designer Software Appendix BAppendix B Appendix C Touchpanel Comparison Charts Crestron Commercial Lighting Design GuideAppendix C Commercial Lighting Design Guide Wireless Touchpanels & Handheld RemotesTask Lighting for Specific Work Areas Appendix D General Lighting Design ConsiderationsStatic and Dynamic Elements Simple Lighting Coverage AreasKey Light Ambient Lighting for Mood and HighlightsDecorative Lighting Focal LightingColor Rendition Switch and Dimmer LocationsColor Temperature Grazing and Washing SurfacesAppendix E Glossary of Lighting Terminology Appendix E Commercial Lighting Design Guide Appendix E Doc 4775A 101 Doc 4775A 102

GLPS-HSW-FT, GLPS-HDSW-FT, GLPS-HSW, GLPS-SW-FT, GLPS-SW specifications

Crestron is a leading company in the field of automation and control technology, and their range of products continues to empower users with innovative solutions for audio-visual management and building control. Among their offerings, the GLPS-SW-FT, GLPS-HDSW-FT, GLPS-SW, GLPS-HSW, and IPAC-GL1 stand out with distinct features and capabilities designed to enhance user experiences in various environments.

The Crestron GLPS-SW-FT is a powerful presentation switcher that facilitates seamless connectivity with multiple input sources, enabling users to consolidate their AV equipment efficiently. With support for multiple resolutions and formats, this device is equipped with advanced processing capabilities, ensuring high-quality video output. Its intuitive interface simplifies operations, allowing users to switch between presentations effortlessly.

The GLPS-HDSW-FT, on the other hand, is a high-definition switcher designed specifically for HDMI connections. This model offers comprehensive support for HDCP compliance and deep color, guaranteeing optimal visual quality during presentations. Furthermore, it features built-in scaling technology, allowing for flexible display configurations that cater to various screen sizes and resolutions.

The Crestron GLPS-SW is engineered to enhance user interaction with its advanced control systems. This device integrates seamlessly with Crestron's ecosystem, providing extensive programming options that allow customization according to specific requirements. Its ability to interface with touch panels and other control devices makes it a versatile solution in corporate settings and educational institutions.

In contrast, the GLPS-HSW is recognized for its robust switching capabilities that manage HDMI, audio, and other video formats simultaneously. This device is particularly suited for complex installations where multiple sources are used. It offers remote management capabilities, enabling system integrators to monitor and control the device effectively.

Lastly, the IPAC-GL1 is a groundbreaking control interface that amalgamates user-friendly design with powerful functionality. This model provides tactile feedback and customizable buttons for precise control over AV systems. Its compact form factor makes it easy to integrate into any workspace, promoting an efficient workflow.

Collectively, these Crestron products represent a commitment to quality and innovation in the realm of AV control and management. They leverage advanced technologies and user-centric designs to meet the evolving demands of modern environments, reaching new heights in interoperability, efficiency, and ease of use. Whether for corporate presentations, educational applications, or entertainment venues, Crestron’s GLPS and IPAC offerings are tailored to provide exceptional performance and reliability.