Crestron electronic GLPS-HSW-FT, IPAC-GL1, GLPS-SW-FT, GLPS-HDSW-FT Green Light Power Switching

Crestron Commercial Lighting Design Guide Green Light Power Switching

Crestron Green Light Power Switching Panels are available in five basic configurations. Use to the following cross-reference table to begin specifying the configuration that fits your application.

This table represents the full line of Crestron Green Light and Green Light Express Power Switching panels, as well as Green Light and Green Light Express Architectural Dimming panels. All are shown side-by-side for easy comparison. The Power Switching panels are each fully detailed under their respective specifications pages within this document. For details about Architectural Dimming panels, please refer to the Crestron Green Light™ Architectural Dimming Specification Guide, Doc. 4785 (future).

		GREEN LIGHT					GREEN LIGHT EXPRESS
	Power Switching		Architectural Dimming				Power Switching		Architectural Dimming
	GLPS-HSW	GLPS-SW	GLPD-DIM	GLPS-HSW-FT			GLPS-SW-FT	GLPS-HDSW-	GLPD-DIM-FT	GLPD-DIMX-FT
								FT
Switching Relay Types
Arcless High-inrush									
Standard high-inrush							
Modular high-inrush								
2-pole available								
Dimming Load Types
Incandescent, MLV										
ELV										
2-wire fluorescent										
3-wire fluorescent										
0-10V fluorescent										
Ratings
Voltages	120/230/277	120/230/277	120/230/277	120/230/277			120/230/277	120/230/	120/230/277	120/230/277
								277/347
Output capacity lighting	16A	16A	16A4			16A	16A	20A	16A4	8A
loads
Output capacity, motor	0.5/1/1 hp	1/2/2 hp	0.5/1/1 hp		0.5/1/1 hp		1/2/2 hp	0.5/1.5/1.5	0.5/1/1 hp
loads@ 120/230/277 volts								hp
Rated relay lifetime5	1,000,000	10,000	1,000,000	1,000,000			10,000	30,000	1,000,000
Circuit Breakers
Integrated branch breakers			
Available main breaker			
Additional Features
Load state indicators										
Local override										
Emergency override										
Mechanical override								
Local control access door		
option
Backup power supply									
capable

Notes:

1.Please see Crestron Green Light™ Architectural Dimming Specification Guide, Doc. 4785 (future) for full description and specifications.

2.Supported via use of appropriate CLS-EXP expansion module.

3.3-wire fluorescent loads require 2 control outputs per load.

4.Consult detailed specifications for ratings for ELV loads.

5.Relay lifetime based on number of cycles (on/off) with full electronic ballast load.

Doc 4775A 13