Crestron electronic IPAC-GL1, GLPS-SW-FT, GLPS-HDSW-FT, GLPS-HSW-FT manual DIN-AP2

Page 54

Crestron Commercial l Lighting Design Guide

DIN Rail Products

DIN-AP2

The DIN-AP2 is a 2-Series control processor designed for small to medium-sized lighting and automation applications. DIN Rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN Rail mountable devices.

Features

2-Series control engine

MMC memory expansion card slot

Cresnet port - master/slave selectable

10/100 Ethernet SSL encryption

e-Control 2, SNMP and RoomView support

2 bidirectional RS-232 COM ports

4 IR/serial ports

8 Versiport I/O ports

4 Low-voltage relay ports

Configurable via Crestron D3 Pro software

2-Series Processor

Built upon the reliable Crestron 2-Series control engine, the DIN-AP2 is extensively programmable using the suite of powerful Crestron development software and vast database of drivers and software modules. The DIN-AP2 works seamlessly with the entire line of Crestron lighting dimmers and shade controls, keypads and touchpanels, thermostats, wireless gateways, and expansion modules.

System Integration

The DIN-AP2 provides for the integration of non-Crestron devices and subsystems through a host of control interfaces. Four isolated relays and eight Versiport I/O ports are built in to accommodate all kinds of sensors, contactors, door strikes, and other low voltage controls. Two bidirectional RS-232 COM ports and four IR/serial ports allow for the integration of everything from simple shade controllers to advanced security systems.

Cresnet®

Cresnet is the communications backbone for Crestron lighting modules, wall box dimmers and shade controllers. The DIN-AP2 includes a pair of Cresnet master ports (paralleled) capable of supporting approximately 20 typical devices. Larger systems with more than 20 devices can be handled by adding the DIN-HUB Cresnet Distribution Hub. Connectivity for multiple homeruns can be facilitated using one or more DIN-BLOCK Cresnet Distribution Blocks. Additionally, at least one DIN-PWS50 Cresnet Power Supply is required to power the DIN-AP2 and any connected Cresnet devices.

Memory Expansion

A memory card slot allows for easy expansion of the DIN- AP2 internal memory using an MMC-compatible memory card up to 2 GB.

Ethernet and e-Control®2

Built-in 10/100 Ethernet facilitates secure high speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. Native features include a built-in email client to report system troubles and other functions to the owner or service company via instant email notification. An onboard Web server provides the foundation for the exclusive Crestron e-Control 2 XPanel technology, providing secure IP-based remote control.

RoomView® and SNMP

For large facilities utilizing multiple DIN-AP2s and other control systems, exclusive Crestron RoomView Help Desk software delivers a comprehensive solution for remote monitoring and asset management. Also, built-in SNMP support enables similar capability using third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.

D3 Pro™ Software

Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional.

Doc. Doc 4775A

50

Image 54
Contents Crestron Green Light Commercial Lighting Design Guide Page Contents Page Introduction Crestron Green LightOr any other Crestron software Single Solution Control System- Crestron Exclusive Crestron Control TechnologyOr automatic load shedding System Design Wireless Systems Lighting System Design TypesCentralized Wired Systems Decentralized Wired Systems System Design Crestron Commercial l Lighting Design GuideHybrid Systems Specifying a Lighting System Required Load Schedule ItemsLoad Schedule Complete diagram is available on line at Example Load Schedule with Panel TerminationsOrdering a Crestron Commercial Lighting System Commercial Lighting Wiring PlanEquipment List Specification Steps to order a lighting systemGreen Light Power Switching System FeaturesCan be programmed without ever having to connect a computer Green Light Power Switching Front GLPS-HSW-MLO-30-120-10K -NDMCB125 Main lug onlyMCB100 Available for 277V onlySpecifications Glps SW MLO 30 120 10K ND 100125 GLPS-SW-MLO Medium 70 x 20-1/4 x 6-5/8 in 177.8 x 51.4 x 16.8 cm Large 78-15/16 x 20-1/4 x 6-5/8 in 200.5 x 51.4 x 16.8 cmModel Numbers GLPS-HSW-FT GLPS-SW-FTGreen Light Express Feed Specifications Load Ratings Glps Hdsw FT Glps Relay Type Feed Type Number of Ckts Small 8, 16 Large 32, 40, 48GLPS-HDSW-FT Load RatingsDoc.4775A Sdram 32 MB Nvram 1 MB EthernetWall Mount 50 Watt Cresnet Power Supply GLA-PWS50120/277 Power Loss Sensor GLS-PLSDimensions Dimensions GLEP-HSW & GLEP-SW Large Panel GLEP-HSW & GLEP-SW Extra Large Panel GLEP-HSW-FT, GLEP-SW-FT, & GLEP-HDSW-FT Panels IPAC-GL1 Green Light Options CAEN- Series EnclosuresSpecifications Crestron Commercial Lighting Design Guide Caen EnclosuresCaen 2X1, 4X1, and 7X1 Framing Caen InstallationCaen Enclosure Framing Caen 4X2 FramingCaen Wiring Universal Mounting Plates Dimensions are provided in inches Cover Extension KitsCLX Lighting Control Modules CLX-Series Lighting Control Modules Model Load RatingTerminal Blocks and Modules Module Installation Single Width Enclosure MountingCresnet Terminal Block for Caen Automation Enclosures Green Light Options-CAEN Enclosures Features DIN Rail InstallationCrestron DIN Rail Products Example DIN Rail System DIN-AP2 Auto Load Detection Phase-Synchronous Detection CircuitryDIN-1DIMU4 Short Circuit ProtectionDIN-8SW8 DIN-4DIMFLV4DIN-2MC2 Analog Outputs DIN-AO8DIN-IO8 VersiportsDIN-PWS50 Cresnet Power DistributionDIN-BLOCK Cresnet DistributionDIN-HUB  3-segment Cresnet hub  32 Cresnet devices per segmentInterface Equipment TPS Isys G-Series with Crestron Home or QuickMedia Wall Mount TouchpanelsTPS Series Isys Tpmc Isys I/O with Crestron Home or QuickMediaTPS-4000L TPMC-8LTPS-4L Tilt Touchpanels TPS-4000TPMC-8X Tpmc Series Isys i/O WiFi TouchpanelsTPMC-8T TPMC-4XGMT-1000C Wireless Touchpanels and HandheldsTPS-6X ML-600Keypads C2N-DB Series Decorator KeypadsC2N-DB Mounting  Each keypad requires 3 watts of power CNX Designer Series KeypadsMounting in Single-Gang Box Cameo Cameo Mounting Options Cameo Flush Mount Mud Ring Mount KitDo not use the C2N-CB with the decorator-style keypads ILux Integrated Lighting Control System ILux Features Wireless iLux Remote Stand-alone Master with Slave wiring Multi-Unit ExpansionControl System Integration Model Load Function Supports 3-wire Fluorescent Fluorescent DimmingILux Expansion Modules Supports incandescent, magnetic low voltageExpansion Modules Wiring Diagrams Wall Box Dimmers and Switches Model Load Features Cresnet Wall Box DimmersCresnet Wall Box Switches CLW-SLVSInfiNET Wireless Technology InfiNET Dimmers, Switches, and Thermostat Example infiNET system Control Processors PAC2 Lighting Control ProcessorPAC2 Power Management & Requirements PAC2M Professional Automation Mini Control System Series Control SystemOverride Basic Lighting System Interconnections Occupancy and Photocell Sensors C2N-SDC-DC Integrated Shade and Drape ControllersC2N-SDC C2N-SSC-2Integrated Partner Modules Integrated SystemsAppendix a RoomView Remote Asset Management RoomView Server EditionAppendix a  Tracking of projector lamp life in bar graph formatExample RoomView Server Edition reports RoomView Express Appendix B Green Light Designer SoftwareAppendix B Appendix C Touchpanel Comparison Charts Crestron Commercial Lighting Design GuideAppendix C Wireless Touchpanels & Handheld Remotes Commercial Lighting Design GuideSimple Lighting Coverage Areas Appendix D General Lighting Design ConsiderationsStatic and Dynamic Elements Task Lighting for Specific Work AreasFocal Lighting Ambient Lighting for Mood and HighlightsDecorative Lighting Key LightGrazing and Washing Surfaces Switch and Dimmer LocationsColor Temperature Color RenditionAppendix E Glossary of Lighting Terminology Appendix E Commercial Lighting Design Guide Appendix E Doc 4775A 101 Doc 4775A 102

GLPS-HSW-FT, GLPS-HDSW-FT, GLPS-HSW, GLPS-SW-FT, GLPS-SW specifications

Crestron is a leading company in the field of automation and control technology, and their range of products continues to empower users with innovative solutions for audio-visual management and building control. Among their offerings, the GLPS-SW-FT, GLPS-HDSW-FT, GLPS-SW, GLPS-HSW, and IPAC-GL1 stand out with distinct features and capabilities designed to enhance user experiences in various environments.

The Crestron GLPS-SW-FT is a powerful presentation switcher that facilitates seamless connectivity with multiple input sources, enabling users to consolidate their AV equipment efficiently. With support for multiple resolutions and formats, this device is equipped with advanced processing capabilities, ensuring high-quality video output. Its intuitive interface simplifies operations, allowing users to switch between presentations effortlessly.

The GLPS-HDSW-FT, on the other hand, is a high-definition switcher designed specifically for HDMI connections. This model offers comprehensive support for HDCP compliance and deep color, guaranteeing optimal visual quality during presentations. Furthermore, it features built-in scaling technology, allowing for flexible display configurations that cater to various screen sizes and resolutions.

The Crestron GLPS-SW is engineered to enhance user interaction with its advanced control systems. This device integrates seamlessly with Crestron's ecosystem, providing extensive programming options that allow customization according to specific requirements. Its ability to interface with touch panels and other control devices makes it a versatile solution in corporate settings and educational institutions.

In contrast, the GLPS-HSW is recognized for its robust switching capabilities that manage HDMI, audio, and other video formats simultaneously. This device is particularly suited for complex installations where multiple sources are used. It offers remote management capabilities, enabling system integrators to monitor and control the device effectively.

Lastly, the IPAC-GL1 is a groundbreaking control interface that amalgamates user-friendly design with powerful functionality. This model provides tactile feedback and customizable buttons for precise control over AV systems. Its compact form factor makes it easy to integrate into any workspace, promoting an efficient workflow.

Collectively, these Crestron products represent a commitment to quality and innovation in the realm of AV control and management. They leverage advanced technologies and user-centric designs to meet the evolving demands of modern environments, reaching new heights in interoperability, efficiency, and ease of use. Whether for corporate presentations, educational applications, or entertainment venues, Crestron’s GLPS and IPAC offerings are tailored to provide exceptional performance and reliability.