3. Using TV Features | 25 |
3D Video
This section provides Instructions for viewing 3D video using 3D glasses and the TV’s 3D feature. The 3D options are found in the Adjust > 3D Mode menu described on page 34.
Initial Setup
1.Check if your HDMI 3D video source device outputs a 1080p 60 Hz signal. This information will be needed when you assign an input name in the New Device Found screen.
2.If your 3D glasses came with an emitter box, connect the emitter box to the 3D GLASSES EMITTER jack. Place the box in front of the TV where there is clear path to the glasses.
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| DVI/PC INPUT |
|
|
| ANT | ||
|
|
|
|
| R | AUDIO | L |
|
|
| |
|
|
| AVR | L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| HDMI |
| AUDIO |
|
|
|
|
|
|
| 3D |
|
| OUTPUT | R |
|
| Y/ VIDEO | Pb | Pr | 2 | GLASSES | |
1 | 2 | 3 |
|
|
|
|
|
| INPUT | EMITTER | |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| Y/ VIDEO | Pb | Pr | INPUT 1 |
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| IGITAL | R | AUDIO | L | (480i / 480p / 720p / 1080i) |
| ||
|
|
| 3D |
|
|
|
|
|
|
| |
|
|
|
| AU IO |
|
|
|
|
|
|
|
|
|
|
| OUTPUT |
|
|
|
|
|
|
|
GLASSES
EMITTER
3.Power on the TV and the source device.
4.Connect the source device to the TV’s HDMI input.
5.When the New Device Found screen displays, name the input according to the table below.
The signal type and choice of name are important because the TV will process the video signal differently depending on the name you assign.
If your source device is a
Source |
| Assign | |
of 3D | 3D Video Signal | ||
Name | |||
Video |
| ||
|
| ||
|
|
| |
Computer | Recommended: 1080p 60 Hz | PC | |
| (1920 X 1080). The image will fill |
| |
| the TV screen. |
| |
| Other |
| |
| signals compatible with the TV |
| |
| will display with black bars. See |
| |
| “Computer Display Formats” on |
| |
| page 27. |
| |
Any other | To see 3D video, the signal must | Any | |
3D video | be 1080p 60 Hz | other | |
source |
| name | |
|
|
|
6.Press BACK to close the New Device Found screen.
Watching 3D Video
Note: 3D glasses are required.
1.Press ACTIVITY.
2.Highlight the icon for the 3D video device and press
ENTER.
3.Press MENU and select the Adjust > 3D Mode menu.
4.Select On. The On setting will be memorized for the current input when you exit this menu.
Use the Adjust > 3D Mode menu to enable 3D video.
5.Press BACK to close the menu.
6.If the image does not appear correct (e.g., objects appear to be moving in instead of out), open the Adjust > 3D Mode menu and set Glasses
To Watch Regular (non-3D) Video
The 3D Mode setting is memorized for each input. When you want to watch
Important Note About 3D Images
To display 3D images, Mitsubishi Home Theater DLP TVs require that source devices support checker- board display formats for 3D gaming or 3D cinema content. A 3D standard format does not currently exist for