Samsung VC07F50VN3Y/EE, VC07F50HU1U/EE, VC07F50VNVR/EE manual Troubleshooting, Problem Solution

troubleshooting

PROBLEM	SOLUTION
Motor does not start.	•	Check cable, plug and socket.
	•	Leave to cool.
Suction force is gradually	•	Check for blockage and remove.
decreasing.
Cord does not rewind	•	Pull the cord out 2-3 m and push down the cord rewind button.
fully.
Vacuum cleaner dows not	•	Check hose and replace if required.
pick up dirt.
Low or decreasing	•	Please check fi lter and, if required, clean as illustrated in the
suction.		instructions. if fi lters are out of condition change them to new ones.
Body overheating.	•	Please check fi lters, if required clean as illustrated in the instruction.
Static electicity	•	Please decrease power suction.
	•	This can also occur when air in the room is very dry.
discharge.
		Please ventilate the room to air humidity become a normal.

This vacuum cleaner is compliant with the following regulations:

-RTTE Directive(1999/5/EC)

-Electromagnetic Compatibility Directive : 2004/108/EEC

-Low Voltage Directive : 2006/95/EC

The official Declaration of conformity may be found at http://www.samsung.com, go to Support Please search Product Support and enter the model name.

20_ troubleshooting