Oreck FC1000 manual Remove Nozzle Hood, Step Remove Brushroll Cover

Page 19

Maintenance - continued

Step 1

ALWAYS DISCONNECT

VACUUM FROM

ELECTRICAL OUTLET

BEFORE STARTING

THIS PROCEDURE!

Remove Nozzle Hood

•Turn the nozzle upright and lift the hood off (B).

Step 2

Remove Brushroll Cover

•Remove brushroll cover (C) by removing the 2 phillips head screws.

Step 3

•Lift brushroll cover off (C).

Step 4

16

Image 19

Contents User’s Guide 888oreck store 1 888 673 Canada 1 888 676USA 1 800 989 To find the nearest location, please callContents Safety Environment Save These Instructions 25 26 27 Nozzle Top View 17 16 Parts Product Components & AccessoriesAssembly Check Bag Indicator ON/OFF SwitchVariable Suction Control Connect Hose Handle to Wand Connect HoseConnect Wand to Nozzle Hard Surfaces Power Nozzle Handle PositionsDirt Sensor Floor Surface Selector Carpet and RugBrushroll Carpet Height Adjustment & IndicatorCleaning Tools Attaching Tools Cleaning StairsBag Full Indicator MaintenanceRemove Bag Open the VacuumComplete the Installation Install New BagRemoving and Cleaning the Motor Filter Remove Nozzle Hood Screws Replace the Hepa Media FilterRemove Nozzle Hood StepStep Remove Brushroll Cover Step Remove/Replace Belt Check/Remove BeltStep Replace Brushroll Replace Brushroll Cover Step When to Replace the BrushrollStep Replace Nozzle Hood Hose/Wand Blockage How to Replace the BrushrollHow to Replacing the Headlight How to Clear BlockagesNozzle Blockage Trouble- shooting Warranty Page Page REV a 09/10 ECN R-10179