Oreck FC1000 manual Environment

Page 5

2

Note: A polarized plug has one

Rounded Prong

rounded prong and one straight

 

prong. The rounded end goes

 

into the longest socket slot.

 

A damaged cord or plug may cause a spark, shock and fire.

Always grasp the plug, not the cord, when unplugging the vacuum. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

Always check the cord and plug before use. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or call customer service at: U.S.: 1-800-989-3535 Canada: 1-888-676-7325.

Do not use the vacuum without a motor protection filter installed.

If abnormal noise, smell, smoke, breakage or other failure occurs during operation, you should turn off the switch and unplug it. Then contact customer service for repair. Do not attempt to repair it yourself.

Unplugging the vacuum while the controls are ON may cause sparking and fire. Turn OFF all controls before unplugging. Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.

Environment

! WARNING!

• Use of the vacuum outdoors or on wet surfaces may result in damage to the appliance and void the warranty. Do not use outdoors or on wet surfaces.

• Using the vacuum with wet hands and on wet surfaces may result in unexpected shock, slippage and personal injury. Do not handle the plug or appliance with wet hands or on wet surfaces.

• Use of the vacuum in an enclosed space containing flammable, explosive materials or toxic vapors may result in an unexpected spark or fire. Do not use the vacuum in such

Image 5
Contents User’s Guide USA 1 800 989 Canada 1 888 676To find the nearest location, please call 888oreck store 1 888 673Contents Safety Environment Save These Instructions 25 26 27 Nozzle Top View 17 16 Parts Product Components & AccessoriesAssembly Variable Suction Control ON/OFF SwitchCheck Bag Indicator Connect Wand to Nozzle Connect HoseConnect Hose Handle to Wand Dirt Sensor Power Nozzle Handle PositionsFloor Surface Selector Carpet and Rug Hard SurfacesBrushroll Carpet Height Adjustment & IndicatorCleaning Tools Attaching Tools Cleaning StairsBag Full Indicator MaintenanceRemove Bag Open the VacuumRemoving and Cleaning the Motor Filter Install New BagComplete the Installation Remove Nozzle Hood Screws Replace the Hepa Media FilterStep Remove Brushroll Cover StepRemove Nozzle Hood Step Replace Brushroll Check/Remove BeltStep Remove/Replace Belt Step Replace Nozzle Hood Step When to Replace the BrushrollReplace Brushroll Cover How to Replacing the Headlight How to Replace the BrushrollHow to Clear Blockages Hose/Wand BlockageNozzle Blockage Trouble- shooting Warranty Page Page REV a 09/10 ECN R-10179