Oreck RORB600, RORB700 Maintenance Troubleshooting, Brushes, Sand Screens, User Maintenance

Page 11

E N G L I S H

Blue Scrub Pad

437057

(medium aggressive)

 

Used for scrubbing.

 

Cleans tile and concrete.

 

Brown Strip Pad

437049

(most aggressive)

 

Strips linoleum, vinyl, laminate and tile floors.

Cleans and scrubs tile and grout.

Can be used on commercial vinyl.

Use on smooth concrete.

Use with Sand Screens.

Scrubs and cleans wood decks.

Beige Marble Pad

437058

(marble only)

• For restoring and cleaning marble floors.

To use a floor pad, see “Attaching Accessories” on page 4 and “Removing Accessories” on page 5.

Brushes

Brushes are designed to get into grooves and recesses on non-flat surfaces. Brushes lift and remove ground-in dirt and grime.

Brushes are coded depending on how aggressive they are with the black carpet brush being the least

aggressive, followed by the tan polish brush (union mix) and the orange scrub brush the most aggressive.

Black Carpet Brush

237049

(least aggressive)

 

Use with Oreck Dry Shampoo.

Safe, soft action needed for carpet cleaning.

Use on textured linoleum.

Use for cleaning delicate or glazed ceramic or porcelain tile.

Tan Polish Brush (Union Mix)

237048

(medium aggressive)

 

Use to polish wood floors.

Will “blend” in excess floor wax, maintain an even coat of wax and eliminate wax build-up.

Use for getting inside cracks of a wood floor.

Use to polish waxed wood floors.

Use for marble, stone, and delicate tile floors

Orange Scrub Brush

237047

(most aggressive)

 

Used to clean ceramic tile or concrete and many tough stains.

To use a brush, see “Attaching Accessories” on page 4 and “Removing Accessories” on page 5.

Sand Screens

Sand screens offer the very best in floor sanding. For all sand screens, place the black drive pad holder on Orbiter® Multi-Floor Machine. Then place the sand screen under any floor pad on floor and center Orbiter® Multi- Floor Machine onto the pad.

60 grit

SS12060

80 grit

SS12080

100 grit

SS12100

For Questions or Information about Oreck’s Line of Cleaning Products, Please Call or Visit Your Local Oreck Dealer.

RESIDENTIAL

USA: 1-800-989-3535

Canada: 1-888-676-7325

www.oreck.com

COMMERCIAL

Commercial: 1-800-242-1378

www.oreckcommercial.com

Maintenance &

Troubleshooting

Care of Your Oreck®

Multi-Floor Machine

This is a precision machine. Dropping, unreasonable bumping or rough handling may result in damage to the balanced counter-weight system. Wrap your cord loosely around the two hooks on the handle. Remove brushes after use. The bristles may be damaged due to the weight of the machine. Store your machine in the upright position. After each use, remove wax or cleaning solutions from the unit. After sanding, blow sawdust off motor. Clean housing and bumper with damp cloth after each use. A little care will keep your Orbiter® looking like new.

User Maintenance

The Orbiter® motor bearings are factory lubricated and sealed. All other servicing should be performed by an authorized service center. There are no user serviceable parts inside.

11

Image 11
Contents Visit ONE of OUR Over 450 Store Locations OrbiterTable of Contents Safety General InformationGrounding Information WarrantyGetting Started Customer ServiceAttaching Accessories IntroductionCarpet and Area Rug Applications Scrubbing Surface CleaningDo not Allow Cleaning Solution to DRY on Floor Laminate, Vinyl Linoleum Floor ApplicationsRefinishing Surface Cleaning Sealed FloorsSealed Hard Wood Floor Applications Waxed Hard Wood Floor Applications Surface Cleaning and Waxing Waxed Hard Wood FloorsDeep Cleaning Tile Floor ApplicationsMarble Restoration Light CleaningStone Floor Applications Concrete and Asphalt Applications AccessoriesSand Screens Maintenance TroubleshootingUser Maintenance BrushesBounces Troubleshooting GuideFloor Machine Will not runInformations Général ES ET DE Sécurité Informations General es et de SécuritéAvertissement Informations de mise à la terreGarantie Pour commencer Service à la clientèleFixation des accessoires Guidage de la machine pour sols Démontage des accessoiresApplications sur Moquettes et tapis Mise en marche/arrêt de la machine pour solsRécurage Applications sur sols Laminés, vinyle et linoléumNettoyage à la bonnette Nettoyage de surfacePrécautions Laissez PAS LA Solution Nettoyante Sécher SUR LE SOLDécapage RestaurationParquets en bois Applications sur sols en Bois dur imprégnéNettoyage de surface de parquet imprégné Passage à la toile abrasiveNettoyage en profondeur Applications sur Sols carrelésApplications sur sols en Bois dur ciré Nettoyage de surface et cirage de parquets cirésÉlimination de l’huile et de la saleté Applications sur sols en pierreApplications sur béton Et asphalte Restauration du marbreTampons AccessoiresGénéraux BonnettesSoins de votre machine pour sols Oreck Entretien et dépannageBrosses Toiles abrasivesGuide de Dépannage Aplicación EN Pisos Encerados Información General y De SeguridadAtencion Información para la puesta a tierraGarantía Instalación de accesorios IntroducciónPara empezar Servicio al ClienteManejo de la Máquina para Pisos Aplicación en alfombras TapetesExtracción de accesorios Encendido y apagado de la Máquina para PisosFregado Aplicación en pisos laminados Vinílicos y de linóleoLimpieza con bonete Limpieza superficialPrecauciones DesprendimientoReacabado Permita QUE LA Solución DE Limpieza SE Seque Sobre EL PisoPisos de madera Aplicación en pisos sellados De madera duraLimpieza superficial de pisos sellados Pulido con mallas abrasivasLimpieza profunda Aplicación en pisos De baldosasAplicación en pisos Encerados de madera dura Limpieza superficial y encerado de pisos de madera duraEliminación de aceite y suciedad Aplicación en pisos de piedraAplicación en concreto Asfalto Restauración de mármolAlmohadillas AccesoriosDe uso general BonetesCuidado de su Máquina Orbiter Multi-Floor Mantenimiento y Localización de fallasCepillos Mallas abrasivasGuía Para Identificación De Problemas

RORB600, RORB400, RORB550, RORB700 specifications

Oreck is renowned for its lightweight and powerful vacuum cleaners, and the RORB series showcases this legacy through its innovative designs and advanced features. Among the popular models in this lineup are the RORB400, RORB700, RORB550, and RORB600, each offering unique characteristics tailored to meet diverse cleaning needs.

The Oreck RORB400 stands out with its impressive maneuverability and ease of use. Weighing only 8 pounds, it is designed for simple handling, making it a favorite among users who prioritize convenience. Its powerful motor provides a deep clean, efficiently removing dirt and debris from various surfaces. The RORB400 features Oreck’s proprietary sanitizing technology, which employs a combination of pre-filter and a HEPA filter that captures 99.97% of allergens as small as 0.3 microns, promoting a healthier home environment.

Transitioning to the RORB700, this model elevates cleaning efficiency with its dual-level suction system. The RORB700 is equipped with a smart sensor that automatically adjusts the suction power based on the type of surface being cleaned, ensuring optimal performance on carpets, hardwood, and tile. This model also integrates a large-capacity dustbin that reduces the frequency of emptying, making it perfect for larger spaces.

The Oreck RORB550 introduces a multi-layer filtration system that not only captures allergens but also blocks odors, making it ideal for households with pets. Additionally, its easy-to-reach controls and lightweight design facilitate seamless use for everyday cleaning tasks. The RORB550's ergonomic handle further enhances comfort, allowing users to clean for extended periods without strain.

Lastly, the RORB600 brings additional technology to the table with its built-in smart navigation system. This model employs sensors to map out rooms and avoid obstacles, allowing for efficient cleaning patterns. Its quiet operation ensures that users can maintain cleanliness without disturbing their household or neighbors. The RORB600 also features extended runtime capabilities, making it suitable for larger homes that require thorough cleaning sessions.

In summary, the Oreck RORB series, including the RORB400, RORB700, RORB550, and RORB600, offers a range of lightweight, user-friendly vacuum cleaners packed with advanced technologies and features. From enhanced filtration systems to intelligent navigation mechanisms, these models deliver exceptional cleaning performance tailored to the modern user’s needs.