E N G L I S H
Maintenance
CHANGING THE FILTER BAG
A. Use only genuine | A | ||
ORECK XL filter bags. | |||
| |||
Stand unit on its back. Twist |
| ||
knob counterclockwise to |
| ||
release and lift out front |
| ||
plate. B. |
| ||
|
|
| |
B |
| ||
|
|
| |
C
C. Remove used bag and insert fresh bag. The cardboard rim fits smoothly into the recessed top. Replace the front plate and
close unit by turning knob clockwise.
| THE WHITE BAG GASKET GLUED |
| IN THE HOUSING MUST BE IN |
White Gasket | PLACE OR UNIT WILL NOT |
OPERATE PROPERLY. REPLACE IF | |
| NEEDED. |
REPLACING MICRO FILTER | Micro Filter |
Stand unit on its back.
Twist knob and lift out front plate. Remove disposable bag.
Remove old filter from bottom inside unit.
Replace with new filter.
A replacement filter is supplied in each package of 12 ORECK XL filter bags or you may order filters separately.
Maintenance and
Customer Service
Your ORECK COMPACT CANISTER VACUUM is a product of precise engineering. The motor bearings are permanently lubricated and should not be oiled. If you require additional information or have problems with your ORECK appliance, you may call ORECK customer service at:
In USA
In Canada
Please specify the model number and serial/code number which can be found on the data plate on the back of the vacuum.
Save your sales or purchase slip. Should your ORECK appliance require warranty service in the U.S.A., present this slip to the
Authorized Service Center as your proof of purchase date, or, in Canada, call customer service.unauthorized Oreck
Troubleshooting Guide
Problem | Possible Source | Areas to Check | ||
Cleaner Will | 1. Not plugged | 1. | Be sure cleaner | |
Not Run |
| in properly |
| is firmly plugged |
|
|
|
| into wall outlet. |
| 2. | No electricity | 2. | Check electrical |
|
| in wall outlet. |
| |
|
|
|
| circuit breaker. |
| 3. | Motor protector | 3. | See Motor |
|
| tripped. |
| Protection System |
|
|
|
| page 2. |
| 4. | Needs | 4. | Take to service |
|
| service. |
| center or call |
|
|
|
| for nearest |
|
|
|
| service center. |
|
|
|
|
|
Vacuum Will | 1. | Filter bag is | 1. | Replace filter |
Not Pick Up |
| full. |
| bag. See “To |
Or Has Low |
|
|
| Replace Filter |
Suction |
|
|
| Bag,” page 5. |
| 2. | Hose/wand | 2. | Remove |
|
| tool is clogged. |
| obstructions. |
| 3. | Air leak due | 3. | Replace gasket. |
|
| to missing or |
| See page 5. |
|
| damaged |
|
|
|
| gasket. |
|
|
|
|
|
|
|
Tools/Wands | 1. | Proper friction | 1. | Push and turn. |
Will Not Stay |
| fit not being |
|
|
Together |
| obtained. |
|
|
|
|
|
|
|
ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.
5