TESTING
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on, wait 1 1/2 minutes.
Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off.
❒Switch the
TEST 1 5 10 MIN | OFF 3 6 DUSK TO |
HOUR DAWN |
Avoid aiming the control at:
•Objects that change temperature rapidly, such as heating vents and air condition- ers. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•Nearby large,
The detector is less sensitive to motion di- rectly towards it and more sensitive to across motion.
MotionMotion
Sensor
Least Sensitive | Most Sensitive |
❒Walk through the coverage area noting where you are when the lights turn on.
❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may increase false triggering.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
❒Set the amount of time after dusk you want the lights on accent level.
6 ft. | 180° |
| |
(1.8 m) |
|
30ft.
(9.1 m)
Maximum Range | Maximum |
| Coverage Angle |