Samsung RL44SDSW1/EUR, RL44ECIH1/EUR, RL41HCIH1/EUR, RL44QEUS1/EUR Disassembly of the Freezer Door

REVERSING THE DOOR SWING

7. Switch the direction of the	8. With 11mm wrench,
electric wire as below. Take	separate the HINGE
out the COVER WIRE HINGE	SHAFT and then flip the
L from the underneath the	HINGE and reattach the
CAP CABI and rejoin it with	HINGE SHAFT.
the electric wire.
	SHAFT

9-2. When disassembling	10. Switch the position of the
CAP SPACE, do not	STOPPER DOOR and
Push both side hooks	the GROMMET HINGE
but bottom hook as	as shown.
shown.

9-1. After rejoining the COVER WIRE HINGE L and

the ASSY HINGE UPP, Switch the position of the GROMMET HINGE and the

CAP SPACE DOOR.

GROMMETHINGE

-DISASSEMBLY OF THE FREEZER DOOR

11.Remove 2 bolts and screw to disassemble the ASSY HINGE MID.

STOPPER

GROMMET

12. Disassemble the Freezer	13. Disassemble the COVER
door by lifting it upward.	LEG FRONT by removing
Be careful not to drop and	the 2 screws.
scratch the Freezer door.

COVER LEG

FRONT

14.Disassemble the ASSY HINGE LOW as shown and put the AUTO GUIDE upside down, switch the position of the SHAFT.

AUTO GUIDE

ASSY HINGE

LOW

When joining, tighten Note a screw not to make

unpredicted noise.

16

DA99-01220M(0.7).indb 16 2010.6.21 11:22:2 AM