REVERSING THE DOOR SWING
- REVERSING THE HANDLE BAR [FRIDGE/FREEZER]
15. Detach the CAP SCREW | 16. Switch the position of the |
HANDLE with flat screwdriver and | CAP HOLE DOORs, pulling |
disassemble the HANDLE BARs. | out and pushing them in. |
- ASSEMBLY OF THE FREEZER DOOR
18. Exchange the positions of a bolt and | 19. After switching the position |
the assy HINGE LOW after making a | of the CAP HOLE HINGE |
hole with phillips head driver on the | LOW, reassemble the |
left bottom side of the unit. | COVER LEG FRONT. |
17.Reattach the HANDLE BARs on the other side of doors in reverse order.
20.Switch the position of the
CAP HOLE HINGE MID and a screw.
21. Switch the position of the | 22. Switch the position of the | 23. Carefully put the Freezer door |
STOPPER DOOR and the | GROMMET HINGE and | back on and assemble HINGE |
GROMMET HINGE as shown. | the CAP HINGE HOLE. | MID with 2 bolts and a screw. |
STOPPER |
|
GROMMET |
|
- ASSEMBLY OF THE FRIDGE DOOR | 25. Secure the ASSY HINGE UPP with 3 bolts as shown. |
24. Carefully put the Fridge door back on. | Make sure the Fridge Door is firmly closed. |
17
2010.6.21 11:22:3 | AM | |
|
|
|