Desa FSBVBPC Product Identification, Local Codes, Product Features, Operation, Piezo Ignitor

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Cast Iron

Stove Body

Log Set

LOCAL CODES

Install and use stove and burner system with care. Follow all local codes. In the absence to local codes, use the current National Fuel Gas Code ANS Z223.1, also known as NFPA 54* (USA) or the current CAN/CGA- B149[.1 or .2] Installation Codes (Canada).

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

	LO HI	OFF
		ON
Front Access Door		Gas Control Valve
	Piezo Ignitor

PRODUCT

FEATURES

OPERATION

This B-vent freestanding stove with burner system is clean burning and vents vertically. Heat is generated by both realistic flames

Venting

System

ON/OFF

Switch (Opposite Side)

Draft Hood Relief Opening

Pilot Assy

Blower with

Adjustment

Knob (Optional

Installation)

Cast Iron

Stove Body

Burner

Glass Door

Assembly

and glowing embers. When used without the blower accessory, the stove with burner system requires no electricity making it ideal for emergency backup heat.

PIEZO IGNITOR

This burner system has a piezo ignitor. This system requires no matches, batteries, or other sources to light burner system.

Rear Cover

Glowing Embers

Lava Rock

Grate Assembly

Figure 1 - FMI B-Vent Burner System Shown Installed in Approved FMI Cast Iron Stove Body Models (P)FC Series Only

107600 3 For more information, visit www.desatech.com