OWNER’S MANUAL
CAST IRON STOVE AND B-VENT BURNER SYSTEM ASSEMBLY
Continued
INSTALLING B-VENT BURNER SYSTEM INTO STOVE BODY
1.Carefully lift burner system and place into stove body from the rear of stove (see Figure 16).
2.Place gasket on top of burner system and align over venting hole (see Fig- ure 17). (An extra gasket is supplied with the burner system and should be kept with the owner’s manual.)
3.Place 4" connector plate over gasket and align holes. Secure with hex screws provided (see Figure 17).
IMPORTANT: Gasket and connecting plate must not be installed until after burner sys- tem has been inserted into stove body.
Center Top Grate (Included with Burner System)
Left Top Grate
Burner
System in
Stove Body
Hex Screw
4" Connector Plate
Gasket | Right Top |
| Grate |
4.Place the left and right grate top into top of stove body. Discard center grate top and replace with center top grate provided with burner system.
Figure 17 - Installing Gasket, Connector Plate, and Top Grates
Burner
Cast Iron System
Stove Body
O
P
Figure 16 - Installing Burner System into Cast Iron Stove Body
Continued
107600 | 7 | For more information, visit www.desatech.com |