Desa CGN10R Service Hints Replacement Parts, Parts Under Warranty, Parts Not Under Warranty

Page 25

SPECIFICATIONS

SERVICE

HINTS

REPLACEMENT PARTS

Btu (Variable)

5,500/10,000

Type Gas

Natural Only

Ignition

Piezo

Pressure Regulator Setting

3" W.C.

Inlet Gas Pressure (inches of water)

 

Maximum

10.5"

Minimum

4"

Dimensions, Inches (H x W x D)

 

Heater

20 1/2 x 13 1/2 x 5

Carton

25 x 16 11/16 x 7 1/2

Weight (pounds)

 

Heater

14

Shipping

18

When gas pressure is too low

pilot will not stay lit

burner(s) will have delayed ignition

heater will not produce specified heat

When gas quality is bad

pilot will not stay lit

burner(s) will produce flames and soot

heater will backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact your local natural gas supplier.

Note: Use only original replacement parts. This will protect your warranty cover- age for parts replaced under warranty.

Parts Under Warranty

Contact authorized dealer from whom you purchased this product. If they cannot supply original replacement part(s), call DESA International’s Customer Service Department at 1-800-323-5190 for referral information.

When contacting your dealer or DESA International, have ready:

your name

your address

model number of your heater

how heater was malfunctioning

type of gas used (propane/LP or natural gas)

purchase date

Usually, we will ask you to return the defective part to the factory.

Parts Not Under Warranty

Contact authorized dealers of this product. If they cannot supply original replace- ment part(s), call DESA International’s Parts Department at 1-800-972-7879 for information.

When calling DESA International, have ready:

model number of your heater

the replacement part number

25

101867

Image 25
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualContents Safety Information Safety Information Safety Device Local Codes Unpacking Product FeaturesProduct Identification Piezo Ignition SystemProviding Adequate Ventilation Fresh AIR for Combustion and VentilationUnusually Tight Construction Unconfined SpaceDetermining if You Have a Confined or Unconfined Space Determining FRESH-AIR Flow for Heater LocationVentilation Air From Inside Building Ventilation AIRVentilation Air from Outdoors Ventilation Air From OutdoorsCheck GAS Type Installation ItemsLocating Heater Marking Screw Locations Installing Heater to WallFolding Anchor Installing Two Mounting ScrewsPlacing Heater On Mounting Screws Connecting to GAS Supply Pressure Testing GAS Supply Piping System ConnectingTo GAS Supply Checking GAS ConnectionsManual Shutoff Valve Pressure Testing Heater GAS ConnectionsOperating Heater For Your Safety Read Before LightingPilot To Select Heating Level Operating Heater Inspecting Burner Manual Lighting ProcedureTo Turn OFF GAS to Appliance Pilot Flame PatternCorrect Burner Flame Pattern Burner Flame PatternODS/PILOT and Burner Orifice Cleaning and Maintenance Trouble ShootingCabinet Air PassagewaysTROUBLE- Shooting See CleaningMaintenance , Ing statement at TROUBLE- Shooting Technical ServiceTop Parts Under Warranty Service Hints Replacement PartsParts Not Under Warranty Parts Centrals Service Publications AccessoryValve GA5010 Illustrated Parts Breakdown Parts List CGN10RKeep this Warranty Warranty Information