The ECO Drum Clean Auto Alarm Function
• If the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by performing the ECO Drum Clean course.
• If you do not perform the ECO Drum Clean course, the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are turned off. However, the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are turned on again after two washes are performed. However, this will not result in a problem with the washing machine.
•Although generally, the ECO Drum Clean Auto Alarm
appears once a month or so, the frequency may differ depending on the number of times the washing machine is used.
• In case of the alarm, please also clean the debris filter (refer to “Cleaning the debris filter” section on page 34). Otherwise the performance of the bubble function may lower down.
Draining the washing machine in an emergency
1.Unplug the washing machine from the power supply.
2. Open the filter cover using a coin or a key.
Filter cover
3.Open the emergency drain cap by pulling it.
Emergency drain cap
03 cleaning and maintaining
4.Hold the cap on the end of the emergency drain tube and slowly pull it out.
5.Allow all the water to flow into a bowl.
Remain water maybe more than you expected. Prepare larger bowl.
6.Reinsert the emergency drain cap and the drain tube.
7.Replace the
Emergency 
drain tube