DOOR REMOVAL
For normal use, the oven door must not be removed but if removal is necessary, for example, for cleaning purposes, follow these instructions.
CAUTION: The oven door is heavy.
2
70
1
01USING THIS MANUAL
1.Open the door and flip open the clips at both hinges completely.
2.Close the door by approximately 70 °. With both hands, grasp the sides of the oven door at its middle and lift and pull upwards until the hinges can be taken out.
3.After cleaning, to attach the door repeat steps 1 and 2 in reverse order.
The clip on the hinge should be closed on both side.
& SAFETY
DOOR GLASS REMOVAL
Glass Door Removal is equipped with four sheets of glass placed against each other. These sheets can be removed for cleaning.
| Glass 1 | Glass 2 Glass 3 |
| |
|
|
| ||
|
| - SW | - Pyro | |
|
|
| ||
|
| M |
| |
| 2 Guide |
|
| |
|
|
| M | |
| rubbers |
|
|
|
1. Remove 2 screws on the | 2. Detach the covering and | 3. After cleaning the door | ||
left and right sides of the | remove glass 1, 2, 3 and | glasses, reassemble and | ||
door. | 2 guide rubbers from the | repeat steps 1 and 2 in | ||
| door. | reverse order. Check the | ||
|
| correct position of glass 2 | ||
|
| and 3 with above picture |
ATTACHING: The
AUTO ENERGY SAVING FUNCTION
•If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is cancelled and clock will be displayed after 10 minutes.
• Light : During cooking process, you can switch off | Oven lamp by pressing ‘Oven light’ button. |
For energy saving, the oven lighting is switched off | a few minutes after cooking program has |
started. |
|
English - 9
INSTRUCTIONS