Samsung AQ09XLNSER manual Fixing the Outdoor Unit in Position, Checking and Testing Operations

COMPLETING THE INSTALLATION

Fixing the Outdoor Unit in Position

456.5 mm

254mm

Rubber leg

The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration, particularly if the outdoor unit is to be installed close to a neighbour.

If it is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to an appropriate support (wall or ground).

1Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of the unit.

2Attach the outdoor unit to the appropriate support using anchor bolts.

3If the outdoor unit is exposed to strong winds, install shield plates around the outdoor unit, so that the fan can operate correctly.

Certainly fix up its rubber leg, in order to prevent its vibration and noise.

Checking and Testing Operations

To complete the installation, perform the following checks and tests to ensure that the air conditioner is operating correctly.

1	Review all the following elements in the installation:
		Installation site strength
		Piping connection tightness to detect any gas leakages
		Connection wiring
		Heat-resistant insulation of the piping
		Drainage
		Earthing wire connection
		Correct operations (follow the steps below)
2	Press the			button.
		Result:		The indicator lights on the indoor unit flash at half-second
				intervals.
				While the indoor unit opens, the indoor unit fan runs to start.
3	Press the			button.
	Result:		The outdoor unit operates in cooling mode as following
			the room temperature.
4	Air flow direction				Press the	button and check that the air flow
					blades work properly.

E-14