using your remote. The test will start and should take only a few seconds.
−− Camera Angle Test: Start Camera Angle Test Select Start using your remote. Please put yourself in the rectangle on the screen by adjusting the camera or moving around. If you are not located in the correct position, the test may not work properly. When done, please spread your hand in the direction of the camera, and shake it three or four times from a side to side.
To use the Motion control function, follow these steps:
1.To use the Motion control, raise your hand while opening it toward the screen, hold it for a moment and then wave it 3 – 4 time to the left and right. Motion control starts. If the Motion control starts, the cursor is displayed at the center of the screen and the Motion guide bar size is at the bottom of the screen.
2.Control the TV using your hands.
✎✎ Note that the Motion control function closes if your hands go out of the camera range.
✎✎ While using the Motion control, if you use the other device (i.e. remote control, keyboard, etc.), Motion control closes.
Controlling the TV with your hands using gestures
■■ Access Gesture Control
−− Action: Spread your hand in the direction of the camera, and shake it three or four times from a side to side.
■■ Pointing Navigation
Moves the cursor to the position you want.
−− Action: Spread your hand and guide the cursor to position you want.
■■ Run
Selects an item or executes a command that is indicated by the cursor or is highlighted.
−− Action: Clench your fist.Back Return to the previous menu.
−− Action: Spread your hand and rotate it counter clockwise.
■■ Channel / Volume Control
Changes the channel or adjust the volume.
✎✎ If you use the Motion control function while watching a channel, the channel / volume control screen appears.
−− Action: Use the Pointing Navigation gesture to move the cursor to the channel or volume controller, and then uses the Run gesture to adjust the channel or volume.
✎✎ If you use the Run gesture once, it has the same effect as pressing a button on your remote. If you hold the Run gesture, it has the same effect as pressing and holding a button on your remote.
■■ Scroll
Scroll the page in the direction you want. For example, suppose that you want to scroll down.
✎✎ Some applications may not support this function.
1.Move the cursor to the bottom of the screen (page scroll zone) using the Pointing Navigation gesture.
2.Move the cursor to the centre of the screen using the Pointing Navigation gesture.
3.The page will move down.
Face recognition
™→ Tools → Settings → Account Manager → Change account information → Register face
Enable or disable the Face recognition function. Lets you register your face in your Samsung account. Also, you can log in to the Samsung account using the Face recognition function without inputting your account ID or your account password.
✎✎ You can register your face in only one account.
To register your face in your Samsung account, follow these steps:
✎✎ To use this function, you must log into Smart Hub. If you don't have a Samsung account, you should create one before using this function. To create your Samsung account, refer to “Creating an Account” (Advanced Features → Smart Hub) in the
1.On the Smart Hub screen, open the Tools menu using your remote, and then select Settings.
2.Select Account Manager. The Account Manager screen appears.
3.Select Change account information. The Change account information screen appears.
4.Select Register face. If you agree to use facial recognition, select OK.
5.Enter your account password.
6.Move your face into the facial lines at the centre of the screen, and then wait until the facial lines changes from red to green.
✎✎ If Face recognition fails, select Retry and try again.
7.When finished, your face is now registered in your Samsung account.
To log in to your Samsung account using Face recognition, follow these steps:
If you use Face recognition to log into Smart Hub, it may be less secure than logging in with a password.
1.With the Smart Hub screen displayed, select ausing your remote. The ID/password screen appears.
2.Select Face Recognition Mode. The Face recognition screen appears.
✎✎ To return to the ID/password screen, select Password mode.
3.The TV starts Face recognition. Face the front of the TV screen. The TV will recognize your face automatically.
✎✎ If the TV fails to recognize your face, try again.
4.The TV logs you into your Samsung account automatically. ✎✎ If the TV recognizes two or more registered faces, the
Samsung account list appears. Select your account to log in. ✎✎ If your face is unregistered, you can register your face in
your Samsung account. Follow steps 4 through 5 in the “To register your face to your Samsung account” procedure above.
✎✎ If you have no account, you can create one. For more detailed information, refer to “Creating an Account” (Advanced Features → Smart Hub) in the
English - 16