Master Lock B150CEA, B70CEA Storing TRANSPORTING, or Shipping, Preventative Maintenance, Schedule

Page 6

R

PORTABLE FORCED AIR HEATERS

STORING,

TRANSPORTING, OR SHIPPING

Note: If shipping, transport companies re- quire fuel tanks to be empty.

1.Drain fuel tank.

Note: Some models have drain plug on underside of fuel tank. If so, remove drain plug to drain all fuel. If heater does not have drain plug, drain fuel through fuel cap opening. Be sure all fuel is removed.

2.Replace drain plug if provided.

3.If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir, and drain again. This will prevent excess debris from clogging filters dur- ing future use.

4.Replace fuel cap or drain plug. Prop- erly dispose of old and dirty fuel. Check with local automotive service stations that recycle oil.

5.If storing, store heater in dry place. Make sure storage place is free of dust and corrosive fumes.

IMPORTANT: Do not store kerosene over summer months for use during next heating season. Using old fuel could damage heater.

PREVENTATIVE

WARNING: Never service heater while

MAINTENANCE

it is plugged in, operating, or hot. Severe

SCHEDULE

burns and electrical shock can occur.

 

 

 

 

Item

How Often

 

How To

 

 

 

Fuel tank

Flush every 150-200 hours of op-

See Storing, Transporting or

 

eration or as needed.

Shipping,column 1

Air output and

Replace every 500 hours of, op-

See Air Output, Air Intake,

lint filters

eration or once a year.

and Lint Filters, page 10.

Air intake filter

Wash and dry with soap and water

See Air Output, Air Intake,

 

every 500 hours of operation or as

and Lint Filters, page 10.

 

needed.

 

 

Fuel filter

Clean twice a heating season or as

See Fuel Filter, page 8.

 

needed.

 

 

Spark plug

Clean and regap every 600 hours

See Spark Plug, page 9.

 

operation or replace as needed.

 

Fan blades

Clean every season or as needed.

See Fan, page 13.

Motor

Not required/permanently lubri-

 

 

cated

 

 

6

104468

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Portable Forced AIR Heaters Safety Information Portable Forced AIR HeatersProduct Identification UnpackingVentilation AssemblyFuels For 100,000 and 150,000 BTU/HR Models onlyTo Start Heater Extension Cord Wire Size RequirementsTheory Operation To Stop HeaterSchedule Preventative MaintenanceStoring TRANSPORTING, or Shipping How Often How ToTroubleshooting Observed Fault Possible Cause RemedyFuel Filter Service ProceduresUpper Shell Removal 35/70,000 Btu/Hr Models70/100/150,000 Btu/Hr Models Spark Plug35,000 Btu/Hr Model 70/100,000 Btu/Hr ModelsPump Pressure Adjustment Air Output, Air Intake, and Lint FiltersModel Nozzle Removing Air and Fuel Line Hoses, 35,000 Btu/Hr ModelProcedure if rotor is binding Pump RotorSpecifications Wiring DiagramsFan Illustrated Parts Breakdown 35,000 BTU/HRParts List KEY Part Number Description QTYBurner Head Assembly 70,000 BTU/HRWLE-3 100,000 BTU/HR Lock Washer, #10 M27417 Drain Plug 150,000 BTU/HR Lock Washer, #10 099229-01 Photocell Bracket Wheels Handles 100,000 and 150,000 BTU/HR Models100,000 150,000 Accessories AIR Gauge KIT HA1180Warranty and Repair Service Corporate HeadquartersCalentadores Portatiles DE Aire Forzado Calentadores Portatiles DE Aire Forzado Informacion DE SeguridadIdentificacion DEL Producto DesembalajeVentilacion ArmadoCombustibles Sólo Para Modelos DE 29,3 Y 44 KW 100.000 Y 150.000 BTU/HRTeoria DE Funcionamiento FuncionamientoEmbarque Preventivo Almacenamiento Programa DETransporte O Mantenimiento Intervalo ProcedimientoLocalizacion DE Averias Advertencia ¡Alto voltajeFiltro de combustible Procedimientos DE ServicioRemoción del casco superior Modelos de 10,2/20,5 kW 35.000/ 70.000 Btu/hrModelos de 20,5/29,3/44 kW 70.000/ 100.000/150.000 Btu/hr BujíaModelo de 10,2 kW 35,000 Btu/hr 20,5/29,3 kW 70/100.000 Btu/hr ModelosFiltros de salida de aire, de admisión de aire y de pelusa Ajuste de la presión de la bombaBoquilla Modelo de 10,2 kW 35.000 Btu/hrRotor de la bomba Procedimiento si el rotor se atascaDiagramas DE Alambrado EspecificacionesVentilador Despiece Ilustrado 10,2 KW 35.000 BTU/HRLista DE Piezas Clave NO. Pieza Descripcion Cant20,5 KW 70.000 BTU/HR Conjunto del quemador10-3 M10809-1 29,3 KW 100.000 BTU/HR Arandela #10 cerrandura HA3019 Conjunto de fotocélula 44 KW 150.000 BTU/HR Arandela, #10 Cerrandura 098512-36 Cámara de combustión Ruedas Y Asas Para Modelos DE 29,3 Y 44 KW 100.000 Y 150.000 BTU/HRAccesorios Juego DE Ruedas Y ASA DE Servicio Severo HA1202Desa

B150CEA, B100CEA, B35CEA, B70CEA specifications

Master Lock is a renowned name in security solutions, offering a wide range of products designed to enhance safety and peace of mind. Among its notable offerings are the B70CEA, B35CEA, B100CEA, and B150CEA padlocks, each tailored for specific applications while ensuring robust protection.

The Master Lock B70CEA is a part of the company's heavy-duty padlock line. This lock features a 1.5-inch (38 mm) wide reinforced metallic body for exceptional strength and durability. Equipped with a boron alloy shackle that stands at 2 inches (51 mm), the B70CEA provides high cut resistance, making it ideal for securing gates, sheds, and storage units. Its dual locking mechanism enhances security, and the weather-resistant body ensures reliable performance in varied environments.

In a slightly lighter category, the B35CEA is designed for everyday use and portability. This padlock features a compact design, with a 1.25-inch (32 mm) wide body. The B35CEA utilizes a 4-pin cylinder for maximum pick resistance, which is essential for personal lockers, toolboxes, and drawer storage. Another feature includes a vinyl-coated shackle that guards against scratches and wear, prolonging the life of your belongings while providing peace of mind.

For those seeking a balance between security features and affordability, the B100CEA stands as an excellent choice. This padlock boasts a 2.5-inch (64 mm) body made from solid brass, which is both strong and resistant to corrosion. The B100CEA also incorporates a 3/8-inch (10 mm) diameter shackle made of steel, providing enhanced strength. This padlock is particularly effective for securing bicycles, gates, and larger storage units.

Lastly, the B150CEA is a padlock that combines versatility with security. It features a 1.5-inch (38 mm) laminated steel body that resists cutting and sawing, ensuring robust performance. The 3/8-inch (10 mm) steel shackle offers strong resistance to cutting attacks while being designed to fit a variety of applications, from outdoor storage to general-purpose use. The innovative pin tumbler design further enhances resistance against picking, making the B150CEA a reliable choice for residential and commercial applications alike.

In summary, Master Lock's B70CEA, B35CEA, B100CEA, and B150CEA padlocks each serve distinct requirements, leveraging robust construction materials, innovative technologies, and advanced locking mechanisms. Whether for high-security demands or everyday usage, Master Lock has ensured that each product provides security and reliability, reinforcing its reputation as a leader in the security industry.
Top Page Image Contents