Lucent Technologies 117A4 installation instructions Power Radio Pass

3If an OUT OF SYNC LED is lit, power down, wait at least 15 seconds, and then repower the carriers in order from left to right, as described in Step 9 in “Installing the Remaining Radio Modules.” If the LED is still lit, call Customer Support as described on the inside front cover of this book.

4The PASS and POWER LEDs on all radio modules should be lit and green, indicating that all of the radio modules are functional. If a radio module’s PASS LED is not lit:

a Power down the carriers.

b Unplug from the wall outlet the power cord/AC adapter of the radio module that did not light.

c Wait 15 seconds.

d Plug in the radio module’s power cord again.

e Repower the carriers again, following the proper left-to-right order.

If the LED is still not lit, call Customer Support as described on the inside front cover of this book.

POWER

RADIO

PASS

Radio

Module

POWER

RADIO

PASS