Lucent Technologies installation instructions Model 117A4 Carrier Installation Instructions

Page 7

Model 117A4 Carrier

Installation Instructions

Important Safety Instructions

This book contains instructions related to safety labels on the product:

!WARNING:

WARNING indicates the presence of a hazard that can cause severe or fatal personal injury if the hazard is not avoided.

!CAUTION:

CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if not avoided.

Basic Safety Precautions for Installation and Use

Always follow these basic safety precautions when installing or using this product to reduce risk of injury from fire or electric shock.

!WARNING:

Installation of this equipment for In-Range Out of Building (IROB) conditions requires the use of protectors. Refer to the documentation provided with your communications system for more information.

!CAUTION:

This equipment is for installation on Lucent Technologies PARTNER, PARTNER Plus, PARTNER II, PARTNER Advanced Communications System, MERLIN, MERLIN Plus, MERLIN II, MERLIN LEGEND, System 25, System 75, System 85, and DEFINITY communications systems only.

Read and understand all instructions in this book before using this product.

Observe all warnings and instructions marked on the product.

Do not use the product near water or when you are wet. If the product comes in contact with any liquids, unplug the power cord and telephone line cords immediately. Do not plug the product back in until it has dried thoroughly.

Never push objects of any kind into this product through housing slots, since the objects may touch hazardous voltage points or short out parts that could result in a risk of electric shock. Never spill liquid of any kind on the phone.

If you suspect a gas leak, report it immediately, but use a phone away from the area in question. The phone’s electrical contacts could generate a tiny spark. While unlikely, it is possible that this spark could ignite a heavy concentration of gas. This product is not approved for use in areas labeled by the Occupational

Model 117A4 Carrier Installation Instructions 503-801-180

Issue 2 February 1999 1

Image 7
Contents TransTalk Digital Wireless System Page Copyright and legal notices Copyright and legal notices Contents Page Basic Safety Precautions for Installation and Use Model 117A4 Carrier Installation InstructionsAdditional Safety Instructions for Installation Personnel AC Outlet Check Understanding Carriers Understanding Carriers Label Explanation Understanding Carriers Positioning Your Carriers Edge of Range Test General Positioning Rules Installing a Single Carrier on a Shelf or Desk Installing a Single CarrierInstalling a Single Carrier Installing a Single Carrier Music Installing a Single Carrier Now go to Single Carrier Installation Self Test Installing a Single Carrier on a Wall Model 117A4 Carrier Installation Instructions Installing a Single Carrier Music Now go to Single Carrier Installation Self Test Control Single Carrier Installation Self TestInstalling Multiple Carriers Mounting and Cabling Multiple Carriers Carrier #1 From Control Carrier Installing Multiple Carriers If the carriers are Plugged into Then Multiple Carrier Mounting and Cabling Self Test117A4 117A3 Installing a Single Radio Module in Each Carrier Installing Multiple Carriers Music If the carriers are Plugged into Then 117A4 117A3 Control Installing the Remaining Radio Modules Installing Multiple Carriers Model 117A4 Carrier Installation Instructions Now go to Installation Self Test for Remaining Radio Modules Installation Self Test for Remaining Radio Modules Power Radio Pass Page Warranty and Repair Information Post-Warranty Repairs In-Warranty RepairsLimitation of Liability Regulatory Information Page Specifications