Installing Multiple Carriers | Model 117A4 Carrier Installation Instructions | |
|
|
|
|
|
|
3Beginning with the first empty slot and working from left to right, insert a radio module into each slot of the control carrier. Hook each radio module onto a mounting rod. Slowly swing the radio module’s card edge into the card edge connector on the back of the carrier.
Note: Slot 6 of a Model 117A3 control carrier must always contain a radio module to pass the synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6 to be filled.
4When the card edge is fully seated, a snap lock on the bottom of the radio module will engage.
5Repeat Steps 3 and 4 for each expansion carrier, until each radio module is inserted into a carrier.
Note: Fill all six slots of the current carrier before inserting radio modules into the next carrier.
Model 117A4 Carrier Installation Instructions | Issue 2 February 1999 37 |