en
Finishing vacuuming manually
Press the Power button on the remote control.
The robot vacuum cleaner will switch to standby automatically after approx.
60 seconds. The display will be deactivated. The battery capacity status indicator will continue to light up.
You can switch the robot vacuum cleaner to standby before 60 seconds is up by pressing the Power button again.
You can reactivate the robot vacuum cleaner by pressing any button on the remote control or one of the two sensors in the robot vacuum cleaner display.
Vacuuming modes
There are four different vacuuming modes.
Auto Standard vacuuming mode for vacuuming normally soiled flooring.
Spot For targeted vacuuming of a surface approx. 5' 11" x 5' 11" (1.8 m x 1.8 m) around the selected starting point of the robot vacuum cleaner.
Corner For vacuuming normally soiled flooring (see Auto). Additional edge vacuuming after returning to the starting point.
Turbo For vacuuming lightly soiled flooring with a short vacuuming duration.
Selecting the vacuuming mode
Press the Power button on the remote control.
There are two ways of selecting the vacuuming mode.
Option 1 (Remote control)
Press the button for the vacuuming mode you want. The corresponding vacuuming mode symbol will light up in the display.
To start vacuuming, press the II button on the remote control or the II sensor in the display.
15