en
Replacing the seal on the dust box
Press the dust box release button and remove the dust box.
Cleaning the front wheel
Place the robot vacuum cleaner upside down on a level, clean surface.
Do not lift the robot vacuum cleaner by the area around the dust box as it can come loose.
Unclip the seal from the bottom of the dust box and carefully swing it out until it detaches from the dust box.
Attach the new seal to the side and clip it into position.
Replace the dust box in the robot vacuum cleaner, making sure it clicks into position.
Unclip the cover. | |
Remove the front wheel. |
Remove any threads and hairs and clean the front wheel with the brush end of the cleaning brush.
Replace the front wheel and close the cover making sure it clicks into position.
Cleaning the sensors
Carefully clean the sensors on the side and the bottom of the robot vacuum cleaner using a dry cotton wool bud.
21