Napco Security Technologies GEM-K4RF manual Napco Limited Warranty

Page 32

NAPCO LIMITED WARRANTY

NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturing

NAPCO neither assumes, nor authorizes any other person purporting to act on its behalf to modify,

defects in materials and workmanship for thirty-six months following the date of manufacture.

to change, or to assume for it, any other warranty or liability concerning its products.

NAPCO will, within said period, at its option, repair or replace any product failing to operate

In no event shall NAPCO be liable for an amount in excess of NAPCO's original selling price of the

correctly without charge to the original purchaser or user.

product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise

This warranty shall not apply to any equipment, or any part thereof, which has been repaired by

arising out of any failure of the product. Seller's warranty, as hereinabove set forth, shall not be

others, improperly installed, improperly used, abused, altered, damaged, subjected to acts of God,

enlarged, diminished or affected by and no obligation or liability shall arise or grow out of Seller's

or on which any serial numbers have been altered, defaced or removed. Seller will not be

rendering of technical advice or service in connection with Buyer's order of the goods furnished

responsible for any dismantling or reinstallation charges.

hereunder.

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY.

DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF

Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminal

MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

tampering, electrical or communications disruption, it is possible for the system to fail to perform as

ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES

expected. NAPCO does not represent that the product/system may not be compromised or

ON THE PART OF NAPCO.

circumvented; or that the product or system will prevent any personal injury or property loss by

Any action for breach of warranty, including but not limited to any implied warranty of

burglary, robbery, fire or otherwise; nor that the product or system will in all cases provide adequate

merchantability, must be brought within the six months following the end of the warranty period.

warning or protection. A properly installed and maintained alarm may only reduce risk of burglary,

IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR

robbery, fire or otherwise but it is not insurance or a guarantee that these events will not occur.

INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR

CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY,

IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN

PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO

NEGLIGENCE OR FAULT.

GIVE WARNING. Therefore, the installer should in turn advise the consumer to take any and all

precautions for his or her safety including, but not limited to, fleeing the premises and calling police

In case of defect, contact the security professional who installed and maintains your security

system. In order to exercise the warranty, the product must be returned by the security

or fire department, in order to mitigate the possibilities of harm and/or damage.

professional, shipping costs prepaid and insured to NAPCO. After repair or replacement, NAPCO

NAPCO is not an insurer of either the property or safety of the user's family or employees, and

assumes the cost of returning products under warranty. NAPCO shall have no obligation under this

limits its liability for any loss or damage including incidental or consequential damages to NAPCO's

warranty, or otherwise, if the product has been repaired by others, improperly installed, improperly

original selling price of the product regardless of the cause of such loss or damage.

used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of God, or on

Some states do not allow limitations on how long an implied warranty lasts or do not allow the

which any serial numbers have been altered, defaced or removed. NAPCO will not be responsible

exclusion or limitation of incidental or consequential damages, or differentiate in their treatment of

for any dismantling, reassembly or reinstallation charges.

limitations of liability for ordinary or gross negligence, so the above limitations or exclusions may

This warranty contains the entire warranty. It is the sole warranty and any prior agreements or

not apply to you. This Warranty gives you specific legal rights and you may also have other rights

representations, whether oral or written, are either merged herein or are expressly cancelled.

which vary from state to state.

 

 

THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC.

turning the equipment off and on, the user is encouraged to try to correct the interference by one

This equipment generates and uses radio-frequency energy and, if not installed and used

or more of the following measures: reorient the receiving antenna; relocate the computer with

properly, that is, in strict accordance with the manufacturer's instructions, may cause interference

respect to the receiver; move the computer away from the receiver; plug the computer into a

to radio and television

different outlet so that computer and receiver are on different branch circuits.

reception. It has been type tested and found to comply with the limits for a Class-B computing

If necessary, the user should consult the dealer or an experienced radio/television technician for

device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are

additional suggestions. The user may find the following booklet prepared by the Federal

designed to provide reasonable protection against such interference in a residential installation.

Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference

However, there is no guarantee that interference will not occur in a particular installation. If this

Problems”. This booklet is available from the U.S. Government Printing Office, Washington, DC

equipment does cause interference to radio or television reception, which can be determined by

20402; Stock No. 004-000-00345-4.

 

 

NAPCO Security Systems, 333 Bayview Avenue, Amityville, NY 11701

DESIGN PATS. PENDING

32

 

Page 31 Page 32
Image 32
Page 31 Page 32
Contents Operating Guide for your GEM-K4 and GEM-K4RF Keypads Introduction Important Test Your System WeeklyTable of Contents Keypad Controls & Indicators TROUBLE, INSTANT, INTERIOR, CANCELLED, and Bypass Arming AW AY Setting the Alarm When Leaving Arming the SystemPriority Arming Selectively Bypassing ZonesManagers Mode Area Arming OptionalInstant Protection Arming in Stay ModeArming Stay Protecting Yourself AT Home Stay Disarming the System Turning OFF the AL ARM Disarming When ReturningAlarm Indication / Silencing an Alarm Fire Protection Fire-Zone TroubleImportant! Read Carefully Preparing a Fire Escape PlanFamily Rehearsal Floorplan Limitations of Fire Alarm Warning System Function Menu P9600 and GEM-P3200 control panels only Function Menu Function Menu Relay Group Communicator Features Central Station MonitoringSecurity Bypass/Unbypass Advanced FeaturesExit-Delay Restart Entering the User Program Mode Programming User CodesProgramming / Reprogramming a User Code Erasing a User CodeExiting the User Program Mode Programming ExampleGlossary Arming/Disarming Turning the system on or off, as followsGlossary Priority Zone with Bypass a Priority Zone that can be System Trouble Error Codes Trouble System Trouble Action Indication Condition06-NN 12-NN E19-00 Troubleshooting What do I do if For more infoNapco Limited Warranty Correctly without charge to the original purchaser or user

GEM-K4RF, GEM-K4 specifications

Napco Security Technologies has long been a reputable player in the security industry, and the GEM-K4 and GEM-K4RF panels are prime examples of the company’s commitment to delivering advanced security solutions. The GEM-K4 panel is designed to cater to the needs of both residential and commercial applications, offering a blend of reliability, flexibility, and ease of use.

At the core of the GEM-K4 system is its user-friendly interface, which features a clear 32-character display and an intuitive keypad. Users can easily manage their security system with simple commands, allowing for quick access to essential functions. The panel supports up to 64 zones, accommodating a wide range of sensors and detectors, making it suitable for a variety of settings.

The GEM-K4RF version includes the added benefit of wireless technology, enabling security professionals to install the system with less disruption to existing structures. This wireless feature allows for the integration of up to 16 wireless zones, which can be particularly advantageous in environments where running wires is impractical. The RF capability ensures compatibility with a range of wireless devices, including motion detectors, door/window contacts, and key fobs, enhancing the overall functionality of the security package.

In terms of communication, the GEM-K4 is equipped with a built-in telephone line communicator, facilitating easy connection to monitoring services. Additionally, it supports various communication protocols, including ContactID, enabling seamless integration with central stations for alarm monitoring. This connectivity ensures that users receive prompt notifications and responses in case of alarms or system status updates.

Another significant characteristic of the GEM-K4 and GEM-K4RF systems is their programmability. Users can customize settings through the panel’s programming options or remotely via a compatible application. This allows for tailored functionality according to specific security needs, such as setting schedules for arming or disarming the system and configuring reports for events.

The durability and reliability of the GEM-K4 series are enhanced by its ability to support backup power systems, ensuring that the security features remain operational during power outages. This critical feature is essential for maintaining the safety and security of monitored assets.

Overall, Napco's GEM-K4 and GEM-K4RF panels embody the modern evolution of security technology, combining advanced features with user-centered design to deliver an effective and reliable security solution that meets the diverse needs of users. With its robust capabilities, the GEM-K4 series continues to be a top choice for security professionals looking to enhance the safety of their environments.
Top Page Image Contents