LOG PLACEMENT
MODEL VWF24/18WP WEATHERED PINE LOG
1.Slide shield plate down back of burner pan. See Figure 122.
2.Place Rear Log #1 on back of grate. Left side should fit on grate in front of rear stand. Right side goes on the rear stand of grate. See Figure 123.
3.Place Bottom Right Log #2 along outside of grate. Rest end on Rear Log #1. Control knob will stick through bottom notch of log. See Figure 124.
4.Place Bottom Left Log #3 on grate. The “V” of the log should straddle the end grate bar. See Figure 125.
5.Place Top Right Log #4 on Bottom Right Log #2 resting on grate. See Figure 126.
Rear Log
(#1) Rear
Stand of
Grate
Figure 123 - Placing Rear Log #1 on Back Grate
“V” Straddling | Bottom Left Log (#3) |
Grate Bar |
|
Figure 125 - Straddling “V” of Bottom Left Log
(#3) on Grate Bar
Shield
Plate
Burner
Pan
Figure 122 - Sliding Shield Plate Down Back of
Burner Pan
Control
Bottom Right Log (#2)Knob Will
Go Here
Figure 124 - Placing Bottom Right Log (#2)
Top Right Log (#4)
Figure 126 - Placing Top Right Log (#4)
36 | 27D8520 |