LOG PLACEMENT
MODEL VWF30/24WP WEATHERED PINE LOG
1.Slide shield plate down back of burner pan. See Figure 129.
2.Place Rear Log #1 on back of grate. Left side should fit on grate in front of rear stand. Right side goes on the rear stand of grate. See Figure 130.
3.Place Bottom Right Log #2 along outside of grate. Rest end on Rear Log #1. Control knob will stick through bottom notch of log. See Figure 131.
4.Place Top Right Log #4 on Bottom Right Log #2 resting on grate. See Figure 132.
5.Place Bottom Left Log #3 on grate. The “V” of the log should straddle the end grate bar. See Figure 133.
Rear Log
Rear
Stand
of
Grate
Figure 130 - Placing Rear Log #1 on Back Grate
Top Right
Log (#4)
Figure 132 - Placing Top Right Log (#4)
Shield
Plate
Burner
Pan
Figure 129 - Sliding Shield Plate Down Back of
Burner Pan
Control
Bottom Right Log (#2)Knob Will
Go Here
Figure 131 - Placing Bottom Right Log (#2)
Bottom Left Log (#3)
“V” Straddling
Grate Bar
Figure 133 - Straddling “V” of Bottom Left Log
(#3) on Grate Bar
38 | 27D8520 |