LOG PLACEMENT
MODEL VWF36/30WP WEATHERED PINE LOG
1.Slide shield plate down back of burner pan. See Figure 137.
2.Place Rear Log #1 on back of grate. Left side should fit on grate in front of rear stand. Right side goes on the rear stand of grate. See Figure 138.
3.Place Bottom Right Log #2 along outside of grate. Rest end on Rear Log #1. Control knob will stick through bottom notch of log. See Figure 139.
4.Place Bottom Left Log #3 on grate. The “V” of the log should straddle the end grate bar. See Figure 140.
5.Place Top Right Log #4 on Bottom Right Log #2 resting on grate. See Figure 141.
Shield
Plate
Burner
Pan
Figure 137 - Sliding Shield Plate Down Back of
Burner Pan
Rear Log | Rear | Bottom Right Log (#2) | Control |
| Stand | Knob Will | |
|
| ||
| of |
| Go Here |
| Grate |
|
|
Figure 138 - Placing Rear Log #1 on Back Grate | Figure 139 - Placing Bottom Right Log (#2) |
Bottom Left Log (#3) |
|
“V” Straddling | Top Right |
Grate Bar | Log (#4) |
Figure 140 - Straddling “V” of Bottom Left Log | Figure 141 - Placing Top Right Log (#4) |
(#3) on Grate Bar |
|
40 | 27D8520 |