Monessen Hearth IDV380PVC, IDV490NVC, IDV490PVC Installation Precautions, Venting Requirements

Page 11

Venting installation

 

 

Read all instructions completely and

 

WARNING

thoroughly before attempting installation.

 

Failure to do so could result in serious

 

 

 

 

injury, property damage or loss of life.

 

 

Operation of improperly installed and

 

 

maintained venting system could result in

 

 

serious injury, property damage or loss of

 

 

life.

 

 

 

 

 

 

 

NOTICE

Failure to follow these instructions will

 

 

 

 

void the warranty.

 

 

 

INSTALLATION PRECAUTIONS

Consult local building codes before beginning the instal- lation. The installer must make sure to select the proper vent system for installation. Before installing vent kit, the installer must read this insert manual and vent kit instructions.

Only a qualified installer/service person should install venting system. The installer must follow these safety rules:

•Wear gloves and safety glasses for protection.

•Use extreme caution when using ladders or when on rooftops.

•Be aware of electrical wiring locations in walls and ceiling.

The following actions will void the warranty on your vent- ing system:

•Installation of any damaged venting component.

•Unauthorized modification of the venting system.

•Installation of any component part not manufac- tured or approved by MHSC.

•Installation other than permitted by these instruc- tions.

 

This insert must be vented to the

WARNING

outside. The venting system must

NEVER be attached to a chimney

 

 

serving a separate solid fuel burning

 

appliance. Each gas appliance must

 

use a separate vent system. Do not use

 

common vent systems.

 

 

IDV380/IDV490 Fireplace Insert

VENTING REQUIREMENTS

 

WARNING

• Make sure the exhaust pipe on heater

 

connects to exhaust portion of cap. At-

 

 

 

 

tach flex liners. Figure 6

 

 

• Do not crimp or rupture liner when bend-

 

 

ing it into chimney offsets.

 

 

 

• The exhaust vent must reline the entire length of chimney and terminate above chimney top.

• Vent must meet all vent manufacturer's requirements when installed.

• Make sure you have the following before installing unit:

380 Series:

• 3" and 3" UL 1777 Listed gas liner for air inlet and exhaust.

• Vertical termination kit (AI31TK33A)

490 Series:

•4" and 3" UL 1777 Listed gas liner for air inlet and exhaust.

•Vertical termination kit (AI42TK43A)

Maximum

Height

40' (12.9 m) Inlet Exhaust Minimum

Height

10' (3 m)

Maximum 12"

(305 mm) Offset at

Base of Insert

FP2625

Figure 7 -

Venting Unit

57D0016

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents IDV Series Direct Vent Gas Fireplace Insert IDV380/IDV490 Fireplace Insert Owner Important Safety InformationInstaller Code Approval Important Safety Information and code approvalGAS pressures Product featuresProduct Specifications High ElevationsIDV380 IDV490 Insert dimensionsBefore You Start Installation InformationInstallation Planning Mantel Clearances Hearth Requirements ClearancesInsert Placement InstallationZERO-CLEARANCE Metal Fireplace Requirements InstallationVenting Requirements Installation PrecautionsAltitude Considerations Venting installationVent Configurations Manifold Removal and Installation Check gas type Insert InstallationInstalling gas piping to fireplace location Installation items neededPropane/LP Insert installationCheck for gas leaks Check GAS PressureDo not use open flame to Remote Wall mounted Switch Electrical WiringInstalling Logs and Rock Wool Ember Material in Firebox Log placementPin on burner. Figure Top Y Log #7 Installing On/Off switch Surround installationInstall Surround Installing Doors Door and Filigree installationInstalling Filigree panels and cabi- net door frame Never use an open flame to check for gas leak What to do if YOU Smell GASInitial lighting Operating Instructions Approved leak testing methodPilot position Main burner switchAdjusting blower speed Lighting the burnerAdjust the AIR Shutter AIR Shutter Adjustment Natural GAS onlyGlass Replacement Pilot and burner flames Cleaning and MaintenanceCleaning glass Venting systemMaintaining your heater’s appearance Firebox cleaningYearly service procedure MaintenanceTroubleshooting Blower Parts List Blower Removal and AssemblyReplacement Parts IDV380NVC IDV380PVC IDV490NVC IDV490PVC Replacement PartsIDV380/IDV490 Fireplace Insert IDV380/IDV490 Fireplace Insert Carbon Monoxide Detector Requirements If Warranty Service is Needed Lifetime WarrantyFive Year Warranty Basic WarrantyMhsc Efficiency Ratings
Related manuals
Manual 40 pages 49.26 Kb

IDV380NVC, IDV490NVC, IDV380PVC, IDV490PVC specifications

The Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC represent a cutting-edge series of direct vent gas fireplaces that combine efficiency, style, and innovative technology. These models are designed to enhance home aesthetics while providing efficient heating solutions.

One of the standout features of the Monessen Hearth models is their impressive heating capabilities. The IDV490NVC and IDV490PVC are designed for larger spaces, providing up to 37,000 BTUs, while the IDV380NVC and IDV380PVC are suitable for medium-sized areas, delivering up to 30,000 BTUs. This makes each fireplace an ideal choice for various residential applications, accommodating different room sizes and heating needs.

The appliances employ advanced direct vent technology, allowing for safe operation by drawing air from outside for combustion and venting exhaust gases outside. This feature ensures that indoor air quality remains unaffected, making these models eco-friendly alternatives to traditional fireplaces. The efficient combustion process also means lower gas consumption, resulting in cost savings and a reduced environmental footprint.

Each model comes equipped with a variety of flame and control options. The realistic ceramic logs and glowing embers create an inviting ambiance, while the adjustable flame height allows users to customize their experience. Additionally, an easy-to-use remote control feature gives users the convenience of adjusting flames and temperature settings without leaving their seats.

The construction of these fireplaces is robust, featuring high-quality materials that ensure durability and longevity. The heat-resistant glass allows for an unobstructed view of the flames, adding a touch of elegance to any room.

Aesthetic choices further enhance personalization, as Monessen offers customizable options for surrounds and mantels that blend seamlessly with various interior styles.

In summary, the Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC fireplaces exemplify modern heating technology combined with stylish design. Their powerful heat output, direct vent capabilities, user-friendly controls, and customizable aesthetics make them exceptional choices for homeowners looking to elevate their living spaces while ensuring comfort and efficiency. Whether for aesthetic appeal or functional heating, these models provide a perfect balance for any modern home.
Top Page Image Contents