L36 LOUVRE INSTALLATION
FIGURE 32 | A |
|
|
B
C
15
HEAT SHIELD STAND-OFF
REMOVAL
HEAT | SHIELD |
|
FIGURE 33 | STAND- |
| OFFS |
END HEAT SHIELD SHOWN
A CLIPS
HOOD
Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through
When using a
LOGO PLACEMENT
SLOT
FLANGE
C E N T R E
the centre slot.
Remove the backing of the logo supplied and place on the screen
B
C
HINGE
CLIP
SLOT
TA B
SLOT
UPPER LOUVRES
Insert the louvre tabs into the slots located at the top left and right corners of the unit.
LOWER LOUVRES
Insert the hinge clips into the slots located at the bottom left and right corners of the unit.
To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assem- bly back. Lift the clip.
cover, as indicated.
FIGURE 34