Napoleon Fireplaces fireplaces manual Table of Contents

Page 2

2

TABLE of CONTENTS

PG 3-4 INTRODUCTION

Warranty

General Instructions

General Information

Care of Glass Doors, Catalytic Tiles

& Plated Parts

5-12 INSTALLATION

Combustion and Ventilation Air Provisions Determining Confined or Unconfined Space Gas Installation

Framing Dimensions

Peninsula Installation Procedure Open End Installation Procedure See-Thru Installation Procedure Island Installation Procedure

13-15 FINISHING

Log Placement

Glowing Embers

Charcoal Embers

Mantle Installation

Curtain Mesh

Hood

Louvre Bracket

Hinge Screen

Louvre Installation & Removal

Heat Shield Stand Off Removal

Logo Placement

16-17 OPTIONS

Patented Catalytic Glass Door

Blower Installation

18-19 OPERATION / MAINTENANCE

Operating Instructions

Maintenance

Catalytic Tile Maintenance

Oxygen Depletion Sensor Pilot Cleaning

Pilot Flame Appearance

Venturi Adjustment

20-21 REPLACEMENTS

Ordering Replacement Parts

Replacement Parts

22-23 TROUBLE SHOOTING GUIDE

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE

WARNING

Under no circumstances should this heater be modified.

Provide adequate ventilation and combustion air. Provide adequate accessibility clearance for servicing and operating the heater. Never obstruct the front opening of the heater.

If heater shuts off, do not re-light until you provide fresh air. If heater keeps shutting off, have it serviced. Keep burner and control compartment clean.

Do not burn wood or other materials in this heater.

Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Keep young children and animals away when the fireplace is hot.

Due to high temperatures, the heater should be located out of traffic and away from furniture and draperies.

Clothing or other flammable material should not be placed on or near the heater.

Any safety screen or guard removed for servicing must be replaced prior to operating the heater.

It is imperative that the control compartments, burners and circulating air passageways in the heater are kept clean. The heater should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. The heater area must be kept clear and free from combustible materials, gasoline and other flammable vapours and liquids.

Furniture or other objects must be kept a minimum of 4 feet away from the front of the fireplace.

Do not use this heater if any part has been under water. Immediately call a qualified service technician to inspect the heater and to replace any part of the control system and any gas con- trol which has been under water.

Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flame patterns.

Do not use a blower insert, heat exchanger insert or other accessory not approved for use with this heater.

ANY CHANGE TO THIS HEATER OR ITS CONTROLS CAN BE DANGEROUS AND IS PROHIBITED.

NOTE: CHANGES, OTHER THAN EDITORIAL, ARE DENOTED BY A VERTICAL LINE IN THE MARGIN

W415-0319 / E / 01.17.07

Image 2
Contents W415-0319 / E Table of Contents Conditions and Limitations Carbon Monoxide Poisoning MAY Lead to Death General InstructionsGeneral Information American Nation Standards Institute IncDetermining Confined or Unconfined Space InstallationCombustion and Ventilation AIR Provisions Using Door Option GAS InstallationWire Size MAX. Length Do not USE Open FlameSided Framing Peninsula Installation ProcedureCountertop / BAR Installation Finishing Brick Panel InstallationFacing RetainerOPEN-END Installation Procedure = 25¼ minus finishing material thickness each sideTail SEE-THROUGH Installation ProcedureFraming Facing Island Installation Procedure Finishing LOG PlacementLocating Pins Hood Mantle InstallationGlowing Embers Charcoal EmbersUpper Louvres L36 Louvre Installation Heat Shield STAND-OFF RemovalLogo Placement Lower LouvresDoor Opening and Closing GVF103-KT Patented Catalytic Door InstallationOptions TOP Door Latch Bottom Door LatchOptional Blower Installation WhiteWhat to do if YOU Smell GAS Operation / MaintenanceFor Your Safety Read Before Lighting Lighting InstructionsOxygen Depletion Sensor Pilot Cleaning MaintenanceCatalytic Tile Maintenance Venturi Adjustment# Part No. Description ReplacementsAccessories Components Unique to Peninsula UnitW415-0319 / E Trouble Shooting Guide Symptom Problem Test SolutionDo not Clean Glass When HOT Fireplace Service History