Texas Instruments TMS320DM357 DVEVM v2.05 manual Setting Up a Tftp Server

Setting Up a TFTP Server

A.3 Setting Up a TFTP Server

You can check to see if a TFTP server is set up with the following command:

host $ rpm -q tftp-server

If it is not set up, you can follow these steps:

1)If you have not yet installed MontaVista Linux Demo Edition (see Section 4.3.1), you can download a TFTP server for your Linux host from many locations on the Internet. Search for "tftp-server".

2)To install TFTP, use this command, where -#.#-#is the version number portion of the filename:

host $ rpm -ivh tftp-server-#.#-#.rpm

You should see the following output:

warning: tftp-server-#.#-#.rpm:

V3 DSA signature: NOKEY, key ID 4f2a6fd2

Preparing... #################################### [100%] 1:tftp-server ################################### [100%]

3) Confirm that TFTP is installed with this command:

host $ /sbin/chkconfig --list grep tftp

If you want to turn on the TFTP server, use this command:

/sbin/chkconfig tftp on

The default root location for servicing TFTP files is /tftpboot.

Additional Procedures A-5