Getting Started

Filling Water Tank

This Humidifier has a 1.5 gallon capacity and 2.6 gallon output in 24 hours (if set to High Fan Speed, Continuous Humidity setting).

To fill Water Tank:

How to Use Humidifier Controls

EVAP3 Pictured

1.Unplug Humidifier. Place on firm and level surface, such as the floor.

Note: Spills can occur during cleaning, moving, or refilling Water Tank, so be careful to avoid spills when doing these activities.

2.Remove Water Tank by grasping recessed handle on top (A). Pull outward and lift (B).

3.Turn Water Tank upside down.

4.Remove Cap (C). Empty any remaining water inside Water Tank. Rinse, wipe clean and dry with clean cloth or paper towel.

5.Place Water Tank in sink with opening at the top.

6.Fill Water Tank with cool tap water (D).

7.Ensure Gasket is properly positioned and secure Cap.

8.Lower Water Tank into Base, positioning Fill Port over raised bump in Base. Once in nested position, the water outlet valve inside Cap will open, releasing water into Base.

8English

Read and understand this owners guide before operating this product. Position unit to not blow directly on objects or plants. Plug unit into a 110-120 volt AC outlet.

Power Button (A) - turns the unit On or Off. LED indicator lights will illuminate default settings when powered On. Unit will default to High Fan Speed, Continuous Humidity.

Fan Setting Button (B) - select desired Fan Setting. On the EVAP3 select - Low, High or Auto. On the EVAP1 select - Low (I), Medium (II) or High (III).

Low or (I) - operation for quiet, nighttime use or smaller rooms. On Low operation, your Humidifier may run without refilling for extended periods.

Medium or (II), EVAP1 Only - operation for normal use.

High or (III) - operation for fast humidification for larger rooms. High

8 English

speed operation will evaporate 2.6 gallons of water (+/- 10%) in 24 hours of continuous operation. (This assumes room conditions of 70º F and 30% relative humidity.)

Auto, EVAP3 Only - operation for more precise humidity control. Fan speed will fluctuate to better maintain set humidity level with the minimal amount of fan noise.

Humidity Button (C) - sets desired humidity level. Press Humidity Button until desired humidification level is illuminated, 35% - 60% or Continuous. The unit will operate until the desired humidity level is reached, at this point, the fan will turn Off and the fan speed indicator light will turn Off. The humidity level indicator light will remain On. If the fan does not turn on, the set humidity level may be lower than the

room humidity level. Increase the humidity set point until the fan turns
On. This is an indication of the level of humidity already in the room.
If moisture forms on walls or windows, lower humidity settings or turn
Off Humidifier.	English	9

Evaporative Vortex Humidifier, EVAP1, EVAP3 specifications

The Vornado EVAP2 Evaporative Vortex Humidifier is a cutting-edge device designed to enhance indoor air quality and comfort, particularly in dry environments. It utilizes a unique vortex technology that sets it apart from traditional humidifiers. This humidifier is engineered to not only add moisture to the air but also to circulate it throughout the room efficiently.

One of the main features of the Vornado EVAP2 is its ability to humidify larger spaces effectively. With a coverage area of up to 1,000 square feet, it is ideal for both homes and offices. This makes it an excellent choice for those looking to maintain the perfect humidity levels in expansive areas. The whisper-quiet operation ensures that you can enjoy its benefits without disruptive noise, making it perfect for bedrooms, nurseries, or workplaces.

The humidifier incorporates a dual-tank system that allows for extended run times between refills. Each tank holds a significant volume of water, meaning you can go longer without needing to constantly check and refill. Additionally, the EVAP2 features a simple, user-friendly interface that allows you to easily adjust humidity settings to match your comfort preferences.

The evaporative technology employed in the Vornado EVAP2 means that it utilizes a wicking filter to naturally add moisture to the air. As air passes through the filter, it absorbs water and is then circulated back into the room, ensuring a continuous flow of humidified air. This not only helps maintain an ideal humidity level but also prevents the over-humidification common in traditional steam or ultrasonic humidifiers.

For added convenience, the Vornado EVAP2 has a built-in humidity indicator that displays the current moisture level in the environment. This helps you make informed adjustments to optimize comfort. Furthermore, the humidifier is designed with a removable filter that is easy to clean or replace, promoting long-term maintenance and efficiency.

In conclusion, the Vornado EVAP2 Evaporative Vortex Humidifier stands out due to its innovative technology, extensive coverage area, and user-friendly features. It effectively enhances the indoor atmosphere, making it a valuable addition to any space needing improved humidity control and overall air quality. With its combination of practicality and efficiency, the EVAP2 is an excellent choice for anyone looking to experience the benefits of a well-humidified environment.