Vermont Casting 2478 manual Clearances, Keep the Stove a Safe Distance From Surrounding Materials

Page 11

Clearances

Keep the Stove a Safe Distance

From Surrounding Materials

Both a stove and its chimney connector radiate heat in all directions when operating. A safe installation re- quires that adequate clearance be maintained between the stove and nearby combustible materials to ensure that such materials do not overheat.

Clearance is the distance between either your stove or chimney connector, and nearby walls, floors, the ceiling, and any other fixed combustible surface. Keep furnish- ings and other combustible materials away from the stove as well. In general, a distance of 48” (1220 mm) must be maintained between the stove and moveable combustible items such as drying clothes, furniture, newspapers, firewood, etc. Keeping those clearance areas empty assures that nearby surfaces and objects will not overheat.

Safe Ways to Reduce Clearances

Your stove has specific clearance requirements that have been established through careful research and testing to UL and ULC standards.

Clearance requirements have been established to meet every installation possibility, and they involve the combi- nation of basic variables:

•When the stove has no listed heat shield

•When the stove has a listed heat shield

•When the wall has no heat shield

•When the wall has a heat shield

•When the stove has a double-wall chimney con- nector

•When the stove has a single-wall connector with heat shields, or without heat shields

In general, the greatest clearance is required when you locate a stove with no heat shield near a wall with no heat shield. The least clearance is required when both the stove and the wall have heat shields. Reducing a stove clearance may require a listed heat shield on the chimney connector as well, or a double-wall connector.

Clearances may be reduced only by means approved by the regulatory authority and in accordance with the clearances listed in this manual. The charts and sample installations that follow list all the clearances required for the various installation configurations of Dutchwest Convection Heaters.

Dutchwest Non-Catalytic Convection Heater

Fig. 14 Extra floor protection may be required for the fire- place hearth, even if your stove is installed with the legs and the bottom heat shield.

Fireplace Installation Clearances

A fireplace installation requires special clearance be- tween the:

•Side of the stove and the right and left walls

•Side of the stove and the decorative side trim on the fireplace face

•Top of the stove and the mantel

In addition, both Fireplace Adaptor and Fireplace Insert installations have special floor protection requirements that are addressed in the section on Floor Protection.

M

TT

T

S

Side Walls (S)

14¹⁄₂” (368 mm)

Trim (T)

8” (203 mm)

Top Trim (TT)

11” (294 mm)

Mantel (M)

17¹⁄₂” (445 mm)

Fig. 15 Minimum clearances for fireplace installation. Recom- mended clearances must be maintained between stove and the surrounding combustible components.

30002278

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Non-Catalytic Convection Heater Model Table of Contents Accessories Model SpecificationsMasonry Chimneys InstallationChimney Types Prefabricated Chimneys Guidelines for Installing the Chimney ConnectorTwo Types of Connector Single-Wall ConnectorSecuring the Connector to a Prefabricated Chimney Double-Wall ConnectorAssembling Single-Wall Chimney Connector Fireplace Installations Above the Fireplace Securing the Connector to a Masonry ChimneyFreestanding Installations Wall Pass-Throughs Fireplace Installations Through the FireplaceCanada Floor ProtectionProcedure Fireplace InstallationsSafe Ways to Reduce Clearances Fireplace Installation ClearancesClearances Keep the Stove a Safe Distance From Surrounding MaterialsClearance Chart Reference Diagrams Designing a Safe InstallationOnly Corner Parallel Installations Stove Clearance Side Rear3Chimney Connector Clearance Right SideDutchwest Convection Heater Model Corner Parallel Installations Chimney Connector Side RearDutchWest Non-Catalytic Convection Heater Model #2478 Wall Heat Shield DimensionsAttach the Legs and Heat Shield AssemblyUnpack the Parts Fan Kit Installation Operation Heater Controls and Features Air ControlLoad Doors Damper Function Successful Wood BurningBurn Only High-Quality Fuel Break-in Fires Use the Air Control Settings That Work Best for YouHow to Build and Maintain a Wood Fire Loading Wood Reloading and Reviving the Fire Lighting the FireSafe Ash Handling Remove Ashes FrequentlyTest and Repair the Door Gaskets MaintenanceCleaning the Glass Adjust the Door LatchAvoid Damaging the Glass Door Panel Damper AdjustmentPrimary Air Control Adjustment Maintenance Schedule Stove Cleaning the Chimney SystemInspect Regularly, Clean As Required TWO Weeks Draft Management Creosote Draft TestingSingle Venting FuelConclusion Dutchwest Convection Heater Dutchwest Convection Heater Months, whichever is longer Limited Lifetime Warranty

2478 specifications

Vermont Castings 2478 is a premium wood-burning stove that embodies quality craftsmanship and efficiency, making it a top choice for homeowners who prioritize both style and functionality. Renowned for its durability and timeless design, the 2478 model is part of the Vermont Castings line, a brand synonymous with excellence in the world of heating appliances.

One of the standout features of the 2478 is its impressive heating capacity. It can efficiently heat spaces of up to 2,100 square feet, making it suitable for large living areas or even small homes. This capability is complemented by its easy-to-use, user-friendly interface, which allows for intuitive operation and precise temperature control.

The 2478 employs advanced Catalytic Combustion technology, which optimizes fuel efficiency while significantly reducing emissions. This technology ensures that the stove burns wood cleanly and effectively, maximizing heat output and minimizing the environmental impact. The catalytic converter enhances the combustion process, providing a longer burn time and requiring less frequent refueling.

In terms of construction, the Vermont Castings 2478 features a robust cast iron body that not only contributes to its aesthetic appeal but also provides exceptional heat retention. The stove is built to last, designed to withstand high temperatures while delivering consistent warmth. The cast iron grates and firebox contribute to excellent heat distribution, creating a cozy atmosphere throughout the room.

Another notable characteristic is the large glass door that offers a beautiful view of the flames, adding a visual focal point to any space. The air wash system keeps the glass clean, allowing for an unobstructed view of the fire. A variety of finishes are available, allowing homeowners to choose a style that best fits their décor, from classic black to rich enamel colors.

The Vermont Castings 2478 is also designed with safety in mind. It includes features such as an adjustable air control system for improved combustion management and a built-in heat shield that protects surrounding areas from excessive heat.

In summary, the Vermont Castings 2478 is a highly efficient, stylish wood-burning stove that provides warmth and comfort in a reliable and environmentally responsible manner. With its combination of advanced technology, durable construction, and elegant design, the 2478 is a worthy investment for any home. Whether you're seeking to enhance your living space or reduce heating costs, this stove stands out as a classic choice in the realm of heating solutions.
Top Page Image Contents