Vermont Casting 2478 manual Floor Protection, Canada

Page 9

A flush-mounted sheet metal cover may be used on one side only. If covers must be used on both sides, each cover must be mounted on non-combustible spacers at least 1” (25 mm) clear of the wall. Your Dutchwest dealer or your local building inspector can provide de- tails of other approved methods of passing a chimney connector through a combustible wall. In Canada, this type of installation must conform to CAN/CSA-B365, Installation Code for Solid Fuel Burning Appliances and Equipment.

NOTE: Do not vent your Dutchwest stove into a factory- built (zero-clearance) fireplace. These appliances and their chimneys are specifically designed as a unit for use as fireplaces. It may void the listing or be hazard- ous to adapt them for any other use.

Floor Protection

A tremendous amount of heat radiates from the bottom plate of your Dutchwest stove. The floor area directly under and around the stove will require protection from radiant heat as well as from stray sparks or embers that may escape the firebox.

Heat protection is provided by the CFM Corporation Bottom Heat Shield. Spark, ember and thermal protec- tion must be provided by a floor protector constructed with noncombustible material as specified.

In the US and Canada most installations will require that the bottom heat shield must be attached. Only when the stove is placed on a completely noncombusti- ble surface such as unpainted concrete over earth may it be used without the heat shield.

Even when the bottom heat shield is installed, you must provide special protection to the floor beneath. For installation with the heat shield attached, use an approved 5/8” (16mm) noncombustible hearth pad with K = 0.84 BTU/in ft2 hr °F or an equivalent material with an R-value of at least 0.744. (Refer to “How to Deter- mine if Alternate Floor Protection Materials are Accept- able” section)The floor protector may be covered with a decorative noncombustible material if desired. Do not obstruct the space under the heater.

Protection requirements vary somewhat between the United States and Canada as follows:

U.S. Installations: The floor protector is required under the stove and must extend at least 16” from the front and left (loading door) side of the stove, and at least 6” from the right side and rear. (Fig. 12)

In Canada: a noncombustible floor protector is required under the heater also. The floor protector must extend 18” (457mm) from the front and left (loading door) side of the stove, and at least 8” (203mm) from the right side and rear. (Fig. 12)

Dutchwest Non-Catalytic Convection Heater

C

BB

A B A B

AA

U.S. Canada

A.16” 18” (457 mm)

B.6” 8” (203 mm)

C.

10”

10” (254 mm)

ST798

Minimum Dimensions for Noncombustible Floor Protectors (Width x Depth):

(5/8” /16mm thick min. with an R-value of at least 0.744)

Model

U.S.

Canada

 

 

 

2478

49¹⁄₂” x 45”

53¹⁄₂” x 49” (1359 mm x 1245 mm)

 

 

 

Fig. 12 Be sure to follow exactly the minimum floor protection requirements on all four sides of the stove.

A

ST799

Fig. 13 Combustible supporting timbers (A) may lie beneath fireplace hearths; such situations require additional floor protection.

Due to the side loading door, floor protector require- ments call for more protection on the left side than on the right. If you wish a more balanced look, increase the other side of the hearth as well. Do not reduce side protection under any circumstances.

How to Determine if Alternate Floor Protection Ma- terials are Acceptable

All floor protection must be noncombustible (i.e. met- als, brick, stone, mineral fiber boards, etc.). Any organic materials (i.e. plastics, wood paper products, etc.) are combustible and must not be used. The floor protection specified includes some form of thermal designation such as R-value (thermal resistance) or k-factor (ther- mal conductivity).

30002278

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Non-Catalytic Convection Heater Model Table of Contents Accessories Model SpecificationsInstallation Chimney TypesMasonry Chimneys Two Types of Connector Guidelines for Installing the Chimney ConnectorSingle-Wall Connector Prefabricated ChimneysDouble-Wall Connector Assembling Single-Wall Chimney ConnectorSecuring the Connector to a Prefabricated Chimney Securing the Connector to a Masonry Chimney Freestanding InstallationsFireplace Installations Above the Fireplace Wall Pass-Throughs Fireplace Installations Through the FireplaceCanada Floor ProtectionProcedure Fireplace InstallationsClearances Fireplace Installation ClearancesKeep the Stove a Safe Distance From Surrounding Materials Safe Ways to Reduce ClearancesClearance Chart Reference Diagrams Designing a Safe InstallationChimney Connector Clearance Corner Parallel Installations Stove Clearance Side Rear3Right Side OnlyDutchwest Convection Heater Model Corner Parallel Installations Chimney Connector Side RearDutchWest Non-Catalytic Convection Heater Model #2478 Wall Heat Shield DimensionsAssembly Unpack the PartsAttach the Legs and Heat Shield Fan Kit Installation Operation Heater Controls and Features Air ControlDamper Function Successful Wood Burning Burn Only High-Quality FuelLoad Doors Use the Air Control Settings That Work Best for You How to Build and Maintain a Wood Fire Loading WoodBreak-in Fires Reloading and Reviving the Fire Lighting the FireSafe Ash Handling Remove Ashes FrequentlyCleaning the Glass MaintenanceAdjust the Door Latch Test and Repair the Door GasketsDamper Adjustment Primary Air Control AdjustmentAvoid Damaging the Glass Door Panel Cleaning the Chimney System Inspect Regularly, Clean As RequiredMaintenance Schedule Stove TWO Weeks Draft Management Single Venting Draft TestingFuel CreosoteConclusion Dutchwest Convection Heater Dutchwest Convection Heater Months, whichever is longer Limited Lifetime Warranty

2478 specifications

Vermont Castings 2478 is a premium wood-burning stove that embodies quality craftsmanship and efficiency, making it a top choice for homeowners who prioritize both style and functionality. Renowned for its durability and timeless design, the 2478 model is part of the Vermont Castings line, a brand synonymous with excellence in the world of heating appliances.

One of the standout features of the 2478 is its impressive heating capacity. It can efficiently heat spaces of up to 2,100 square feet, making it suitable for large living areas or even small homes. This capability is complemented by its easy-to-use, user-friendly interface, which allows for intuitive operation and precise temperature control.

The 2478 employs advanced Catalytic Combustion technology, which optimizes fuel efficiency while significantly reducing emissions. This technology ensures that the stove burns wood cleanly and effectively, maximizing heat output and minimizing the environmental impact. The catalytic converter enhances the combustion process, providing a longer burn time and requiring less frequent refueling.

In terms of construction, the Vermont Castings 2478 features a robust cast iron body that not only contributes to its aesthetic appeal but also provides exceptional heat retention. The stove is built to last, designed to withstand high temperatures while delivering consistent warmth. The cast iron grates and firebox contribute to excellent heat distribution, creating a cozy atmosphere throughout the room.

Another notable characteristic is the large glass door that offers a beautiful view of the flames, adding a visual focal point to any space. The air wash system keeps the glass clean, allowing for an unobstructed view of the fire. A variety of finishes are available, allowing homeowners to choose a style that best fits their décor, from classic black to rich enamel colors.

The Vermont Castings 2478 is also designed with safety in mind. It includes features such as an adjustable air control system for improved combustion management and a built-in heat shield that protects surrounding areas from excessive heat.

In summary, the Vermont Castings 2478 is a highly efficient, stylish wood-burning stove that provides warmth and comfort in a reliable and environmentally responsible manner. With its combination of advanced technology, durable construction, and elegant design, the 2478 is a worthy investment for any home. Whether you're seeking to enhance your living space or reduce heating costs, this stove stands out as a classic choice in the realm of heating solutions.
Top Page Image Contents