Vermont Casting 2478 manual Dutchwest Convection Heater Model

Dutchwest Non-Catalytic Convection Heater

Distance from Center of Flue Collar to Wall in Top-Exit Installations

Dutchwest Convection Heater Model 2478

NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col- lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the wall protector.

B A C

C

E D

F

F

ST427

	UNPROTECTED SURFACES			PROTECTED SURFACES
			Corner			Corner
	Parallel Installations		Installations	Parallel Installations		Installations
Chimney Connector	Side	Rear	Corner	Side	Rear	Corner
Listed, Approved	(A) 30”	(B) 13”	(C) 18¹⁄₂”	(D) 21”	(E) 12¹⁄₂”	(F) 18”
Double-wall, with	(762 mm)	(330 mm)	(470 mm)	(533 mm)	(318 mm)	(457 mm)
flue collar shield
Single wall, with	(A) 27”	(B) 13”	(C) 18¹⁄₂”	(D) 20”	(E) 9”	(F) 15”
Connector heat shields	(686 mm)	(330 mm)	(470 mm)	(508 mm)	(229 mm)	(381 mm)
and flue collar shield
Single wall with no	(A) 33”	(B) 23”	(C) 26¹⁄₂”	(D) 20”	(E) 17”	(F) 21¹⁄₂”
heat shields	(838 mm)	(584 mm)	(673 mm)	(508 mm)	(432 mm)	(546 mm)

14 30002278