Vermont Casting 2478 manual Assembly, Unpack the Parts, Attach the Legs and Heat Shield

Page 16

Dutchwest Non-Catalytic Convection Heater

Assembly

Your convection heater requires some assembly. Follow the directions carefully and refer to the parts diagram at the back of this manual.

Unpack the Parts

Remove the bottom heat shield strapped to the top of the stove and all loose parts from the firebox and the ash pan. Check to make sure all the parts are included and intact. You should have received:

•1 fully assembled heater body

•1 bottom heat shield*

•4 legs

•1 ash pan

•1 ceramic handle assembly

•1 hardware bag, containing the following parts:

•(3) #10 x 1/2” sheet metal screws, (to attach the chimney connector to the flue collar)

•(1) 1/8” Allen wrench, (to tighten the door latch)

•(1) 5/32” Allen wrench, (to tighten the damper handle)

•(4) washers, (used with the leg bolts to attach legs to the stove)

•(1) door handle insert holder (for storing the ce- ramic handle assembly when it is not in use.)

•(4) 1/4-20 x 1” hex head screws, (to attach legs)

If any parts are missing or damaged, immediately notify your Dutchwest dealer for replacements. Do not install your stove without having all necessary parts or using damaged parts.

*A Bottom Heat Shield is required in many instal- lations. Refer to the floor protection information found in the Installation Section of this manual.

Attach the Legs and Heat Shield

NOTE: To avoid damaging the sheet metal compo- nents, do not place the stove on its back to install the legs. Follow the instructions below.

1.Remove the band that holds the stove to the pallet and remove the bottom heat shield that was posi- tioned on top of the stove. (Fig. 19)

2.Rotate the stove counterclockwise until the front left corner overhangs the pallet and the leg-mounting hole is accessible. (Fig. 20)

3.Remove and discard the (4) 1/4-20 x 3/8” hex head bolts that are in the leg holes on the bottom of the stove.

Bottom Heat Shield

ST813

Fig. 19 Remove bands holding stove to pallet and remove heat shield from to of stove.

Leg

 

Bolt

 

 

Handle Insert

 

Holder

 

ST814

Fig. 20

Rotate stove on pallet to expose front left corner.

4.In the hardware bag, locate the four legs, the door handle insert holder, (on this leg only, the door handle insert holder is used along with a washer),

(4) 1/4-20 x 1” leg bolts and four (4) washers.

5.Place the bolt through a washer and then the door handle insert holder and align the leg with the bolt hole in the bottom of the stove. Tighten securely.

16

30002278

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Non-Catalytic Convection Heater Model Table of Contents Accessories Specifications ModelChimney Types InstallationMasonry Chimneys Guidelines for Installing the Chimney Connector Two Types of ConnectorSingle-Wall Connector Prefabricated ChimneysAssembling Single-Wall Chimney Connector Double-Wall ConnectorSecuring the Connector to a Prefabricated Chimney Freestanding Installations Securing the Connector to a Masonry ChimneyFireplace Installations Above the Fireplace Fireplace Installations Through the Fireplace Wall Pass-ThroughsFloor Protection CanadaFireplace Installations ProcedureFireplace Installation Clearances ClearancesKeep the Stove a Safe Distance From Surrounding Materials Safe Ways to Reduce ClearancesDesigning a Safe Installation Clearance Chart Reference DiagramsCorner Parallel Installations Stove Clearance Side Rear3 Chimney Connector ClearanceRight Side OnlyCorner Parallel Installations Chimney Connector Side Rear Dutchwest Convection Heater ModelWall Heat Shield Dimensions DutchWest Non-Catalytic Convection Heater Model #2478Unpack the Parts AssemblyAttach the Legs and Heat Shield Fan Kit Installation Heater Controls and Features Air Control OperationBurn Only High-Quality Fuel Damper Function Successful Wood BurningLoad Doors How to Build and Maintain a Wood Fire Loading Wood Use the Air Control Settings That Work Best for YouBreak-in Fires Lighting the Fire Reloading and Reviving the FireRemove Ashes Frequently Safe Ash HandlingMaintenance Cleaning the GlassAdjust the Door Latch Test and Repair the Door GasketsPrimary Air Control Adjustment Damper AdjustmentAvoid Damaging the Glass Door Panel Inspect Regularly, Clean As Required Cleaning the Chimney SystemMaintenance Schedule Stove TWO Weeks Draft Management Draft Testing Single VentingFuel CreosoteConclusion Dutchwest Convection Heater Dutchwest Convection Heater Limited Lifetime Warranty Months, whichever is longer

2478 specifications

Vermont Castings 2478 is a premium wood-burning stove that embodies quality craftsmanship and efficiency, making it a top choice for homeowners who prioritize both style and functionality. Renowned for its durability and timeless design, the 2478 model is part of the Vermont Castings line, a brand synonymous with excellence in the world of heating appliances.

One of the standout features of the 2478 is its impressive heating capacity. It can efficiently heat spaces of up to 2,100 square feet, making it suitable for large living areas or even small homes. This capability is complemented by its easy-to-use, user-friendly interface, which allows for intuitive operation and precise temperature control.

The 2478 employs advanced Catalytic Combustion technology, which optimizes fuel efficiency while significantly reducing emissions. This technology ensures that the stove burns wood cleanly and effectively, maximizing heat output and minimizing the environmental impact. The catalytic converter enhances the combustion process, providing a longer burn time and requiring less frequent refueling.

In terms of construction, the Vermont Castings 2478 features a robust cast iron body that not only contributes to its aesthetic appeal but also provides exceptional heat retention. The stove is built to last, designed to withstand high temperatures while delivering consistent warmth. The cast iron grates and firebox contribute to excellent heat distribution, creating a cozy atmosphere throughout the room.

Another notable characteristic is the large glass door that offers a beautiful view of the flames, adding a visual focal point to any space. The air wash system keeps the glass clean, allowing for an unobstructed view of the fire. A variety of finishes are available, allowing homeowners to choose a style that best fits their décor, from classic black to rich enamel colors.

The Vermont Castings 2478 is also designed with safety in mind. It includes features such as an adjustable air control system for improved combustion management and a built-in heat shield that protects surrounding areas from excessive heat.

In summary, the Vermont Castings 2478 is a highly efficient, stylish wood-burning stove that provides warmth and comfort in a reliable and environmentally responsible manner. With its combination of advanced technology, durable construction, and elegant design, the 2478 is a worthy investment for any home. Whether you're seeking to enhance your living space or reduce heating costs, this stove stands out as a classic choice in the realm of heating solutions.
Top Page Image Contents