Trane CAB-PRC001-EN manual Controls Features, Control Features, ZN.520 Additional Features

Page 28

Controls Features

Control Features

The following control functions are standard features on units with Tracer ZN.010, ZN.510, or ZN.520.

Occupied/Unoccupied Operation The occupancy input utilizes a binary switch (i.e. motion sensor, timeclock, etc.) that allows the zone sensor to utilize it’s unoccupied internal setpoints.

Random Start

This feature randomly staggers multiple unit start-up to reduce electrical demand spikes.

Warm-up

The two-position fresh air damper option closes during the occupied mode when the space temperature is three degrees or more below the heating setpoint tem- perature. The damper remains closed during warm-up until the space tempera- ture is within two degrees of the heating setpoint temperature.

Manual Output Test Function

This feature is an invaluable tool for troubleshooting a unit. By simply pressing the controller’s test button, service personnel can manually exercise outputs in a pre-defined sequence.

Peer to Peer Communication (ZN.510 and ZN.520)

Peer to peer communication allows multiple units in one space to share the same zone sensor and provide simulta- neous heating. The ZN.510 or ZN.520 controller can share information between units on the same communication link using a twisted pair wire in the field. Unit

configuration must be modified with Rover service tool.

ZN.520 Additional Features

Fan Status

The ZN.520 controller monitors the fan output status to determine if the fan is operating.

Filter Maintenance Status

The controller has an adjustable timer that indicates through Summit or Rover when filter maintenance is necessary. Filter maintenance status is based on cumulative fan run hours.

Water Valve Override

Using Summit or Rover, the water valve override function drives all water valves in every unit fully open simultaneously. This helps reduce the time required for waterside balancing.

Cascade Control

The controller maintains discharge air temperature using a cascade control algorithm. The discharge air temperature is based on the difference between the space temperature and setpoint. Unit capacity modulates to achieve the discharge air temperature.

Interoperability

The ZN.520 controller can be used with a Tracer Summit system or on other control systems that suport LonTalk and the SCC profile. For more information on specific inputs and outputs, see the Installation, Owner, and Maintenance Manual, UNT-IOM-6.

28

CAB-PRC001-EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Force-Flo Cabinet Heater DecemberIt isn’t just a fan and a coil… Contents Features and Benefits Procedure SelectionModel Number DescriptionDigit 27 Main Control Valve Digit 28 Not UsedDigit 29 Piping Packages Digit 30 Control TypeGeneral Data Configurations UnitModel a Vertical Concealed Model B Vertical CabinetModel C Horizontal Concealed Outlet Inlet Model D Horizontal CabinetFresh Air Outlet Model E Horizontal Recessed General Data Unit ConfigurationsModel F Vertical Wall Hung Cabinet Model H Vertical RecessedModel J Vertical Cabinet Slope TopModel M Inverted Vertical Cabinet General DataModel N Inverted Vertical Recessed Table GD-1. Force-Flo Cabinet Heater General Data Table GD-2. Cabinet Heater Air FlowElectric Heat Electric HeatFactory-Installed Piping Packages Piping PackagesGeneral Data Piping Package OptionsSelecting the Correct Modulating Valve Size Performance Hot WaterData CoilsTable PD-2. Free Discharge Motor, Group Table PD-3. Free Discharge Motor, GroupTable PD-4. Free Discharge Motor, Group Table PD-5. High Static Motor, Group Table PD-6. High Static Motor, GroupPerformance Steam DataCoils Table PD-7. Free Discharge Motor, GroupTable PD-8. Free Discharge Motor, Group Table PD-9. Free Discharge Motor, GroupTable PD-11. High Static Motor, Group Table PD-10. High Static Motor, GroupTable PD-12. Steam Properties Manual Fan Mode Switch ControlsControl Options Tracer ControlsControls Operation SequenceSequence of Operation Table C-1. Controller Input/Output Summary General Controls InformationTable C-2. Controller Function Summary Zone Sensor Controls OptionsZone Sensor Options ZN.010Control Features Controls FeaturesZN.520 Additional Features Two-Position Control Valves End Device OptionsControl Valve Two-Position Fresh Air Damper Actuator Electrical Data Units with Electric HeatCalculating MCA Calculating MFSRPM Table ED-6. Two-Stage Electric Heat Digit 18 = U Table ED-7. Single-Stage, Max kW Electric Heat Digit 18 = N Table ED-8. Single Stage, Low kW Electric Heat Digit 18 =Table DW-1. Operating Weights lbs. kg Dimensions WeightsTable DW-2. Shipping Weights lbs. kg Dimensions Vertical Concealed Unit DimensionsVertical ConcealedVertical Cabinet Unit Dimensions Vertical Cabinet, Model BHorizontal Horizontal Concealed Unit DimensionsHorizontal Concealed, Model C Cabinet Horizontal Cabinet Unit DimensionsHorizontal Cabinet, Model D Recessed Horizontal Recessed Unit DimensionsHorizontal Recessed, Model E Wall Hung Vertical Wall Hung Cabinet Unit DimensionsVertical Wall Hung Cabinet, Model F Vertical Recessed Unit Dimensions Vertical Recessed, Model HSlope Top Vertical Slope Top Unit DimensionsVertical Slope Top, Model J Inverted Vertical Inverted Vertical Cabinet Unit DimensionsInverted Vertical Cabinet, Model M Inverted Vertical Recessed Unit Dimensions Inverted Vertical Recessed, Model NCoil ConnectionsCoil Connections Vertical Units Horizontal Units Inverted UnitsFresh Air Fresh Air Opening Dimensions, Horizontal UnitsOpening Fresh Air Opening Dimensions, Vertical Units Wall Box Continuous Mortar Ribs TOP and BottomProjection Panel Dimensions Dimensions Projection PanelProjection Panel Mechanical Specifications Electric Heat Coil FiltersFresh Air Damper Manual DamperMechanical Specifications Options False Backs Recessing FlangesAluminum Wall Boxes Projection PanelsManual Circuit Setter Piping Components Ball ValveAuto Circuit Setter Control Valve Balance FittingUnion StrainerTrane Company Division of American Standard Inc

CAB-PRC001-EN specifications

The Trane CAB-PRC001-EN is an advanced control system designed to enhance the efficiency and performance of commercial heating, ventilation, and air conditioning (HVAC) systems. This building automation system plays a crucial role in optimizing indoor climate conditions while maximizing energy savings.

One of the standout features of the CAB-PRC001-EN is its capability for real-time monitoring and control. The system integrates seamlessly with various HVAC components, allowing users to adjust settings, schedules, and operational modes from a centralized interface. This flexibility ensures that building managers can respond promptly to changes in occupancy or external weather conditions, optimizing comfort while minimizing energy consumption.

The CAB-PRC001-EN employs a robust set of advanced technologies aimed at enhancing system reliability. Utilizing adaptive control algorithms, it intelligently balances heating and cooling loads across different zones, ensuring a consistent temperature environment throughout the building. The system can quickly adapt to variable load conditions, improving energy efficiency and reducing wear on equipment.

Another defining characteristic is its commitment to user-friendly operation. The intuitive interface utilizes a clear graphical display, making navigation straightforward for users of all skill levels. Furthermore, the system can be accessed remotely through web-enabled devices, providing convenience and flexibility for building managers who are often on the move.

Integration capabilities are another hallmark of the CAB-PRC001-EN. It is designed to work with a multitude of third-party devices and protocols, enabling a comprehensive building management solution. This compatibility allows for smooth communication between different systems, including lighting, security, and fire safety systems, fostering an environment of enhanced operational efficiency.

In addition, the CAB-PRC001-EN supports advanced analytics and reporting features. Users can generate detailed reports on energy usage, system performance, and maintenance needs, enabling informed decision-making that can lead to further energy savings and improved system longevity.

In summary, the Trane CAB-PRC001-EN control system is a cutting-edge solution designed for commercial buildings, offering a combination of real-time monitoring, advanced control technologies, user-friendly interfaces, seamless integration capabilities, and powerful analytics. This makes it an ideal choice for any organization looking to enhance their HVAC operations while promoting sustainability and energy efficiency.
Top Page Image Contents