Trane CAB-PRC001-EN manual Electric Heat Coil, Filters, Fresh Air Damper, Manual Damper

Page 51

Mechanical Specifications

Three-Way, Two-Position Control Valves Normally open three-way,two-position valves are rated for a maximum 25 psig (207 kPa) pressure differential across the valve. Normally closed three-way two- position valves are rated for a maximum 15 psig (103 kPa) pressure differential across the valve. All 3-way valve piping packages include a bypass line with a balance fitting to set flow through the bypass line. The balance fitting has a maximum working pressure of 150 psig (1,034 kPa). The valves are also available with a maximum close-off pressure of 50 psig (345 kPa). The valve actuator is easily removable for service without removing the valve body from piping.

Modulating Control Valves Two-way and three-way modulating valves are rated for a maximum 50 psig (345 kPa) pressure differential across the valve. Modulating valves are available in Cv values of 0.7, 1.5, 2.5 and 4.0.

All two-position and modulating control valves have a maximum working pressure of 300 psig (2,069 kPa). The maximum entering water temperature of the valve is 200 F (93 C).

Electric Heat Coil

Electric heating coils are available as the total source of heating on all Force-Flo™ cabinet heaters except inverted models. The electric heat coils are Nichrome elements with an open-wire design. Single stage coils are available on all units and two-stage coils are available on units with a Tracer ZN.520 controller. The electric heat operates at the same voltage as the unit. Therefore, only a single-point power connection is necessary.

All standard electric heat coils are UL listed and interlocked with the fan motor

switch. Therefore, electric heat operation is possible only when the fan is running. A transformer is supplied to eliminate the need for field installation of a step-down transformer. A unit-mounted magnetic contactor is supplied on all voltages. A high temperature cutout with automatic reset is provided as an integral part of the elements to de-energize the electric heat in the event of an overheat condition.

Filters

Filters are concealed from sight and easily removable. Filters are located behind an integral access door on horizontal type units. Filters are either 1” (25 mm) throwaway or 1”(25 mm) pleated media throwaway. Pleated media filters are Farr 30/30.

Fresh Air Damper

A fresh air opening with damper is a factory-installed option. Dampers are constructed of 18-gauge steel. Fresh air is sealed off with gasket material when the damper is set in the closed position. Return and fresh air mixes when the damper is open.

Manual Damper

The manual damper is field-adjustable to allow zero to 100 percent fresh air. The automatic two-position damper is accompanied by a factory-installed and wired two-position (spring-return) actuator.

Auto Two-Position Damper

The auto two-position damper is factory set at 25 percent when open. The damper can be set in the field to allow from zero to 50 percent fresh air.

CAB-PRC001-EN

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents December Force-Flo Cabinet HeaterIt isn’t just a fan and a coil… Contents Features and Benefits Description ProcedureSelection Model NumberDigit 30 Control Type Digit 27 Main Control ValveDigit 28 Not Used Digit 29 Piping PackagesModel B Vertical Cabinet General Data ConfigurationsUnit Model a Vertical ConcealedModel C Horizontal Concealed Model D Horizontal Cabinet Outlet InletFresh Air Outlet General Data Unit Configurations Model E Horizontal RecessedModel F Vertical Wall Hung Cabinet Vertical Cabinet Slope Top Model HVertical Recessed Model JGeneral Data Model M Inverted Vertical CabinetModel N Inverted Vertical Recessed Table GD-2. Cabinet Heater Air Flow Table GD-1. Force-Flo Cabinet Heater General DataElectric Heat Electric HeatPiping Packages Factory-Installed Piping PackagesPiping Package Options General DataSelecting the Correct Modulating Valve Size Coils PerformanceHot Water DataTable PD-3. Free Discharge Motor, Group Table PD-2. Free Discharge Motor, GroupTable PD-4. Free Discharge Motor, Group Table PD-6. High Static Motor, Group Table PD-5. High Static Motor, GroupTable PD-9. Free Discharge Motor, Group Performance Steam DataCoilsTable PD-7. Free Discharge Motor, Group Table PD-8. Free Discharge Motor, GroupTable PD-10. High Static Motor, Group Table PD-11. High Static Motor, GroupTable PD-12. Steam Properties Tracer Controls Manual Fan Mode SwitchControls Control OptionsSequence Controls OperationSequence of Operation General Controls Information Table C-1. Controller Input/Output SummaryTable C-2. Controller Function Summary ZN.010 Zone SensorControls Options Zone Sensor OptionsControls Features Control FeaturesZN.520 Additional Features End Device Options Two-Position Control ValvesControl Valve Two-Position Fresh Air Damper Actuator Calculating MFS Electrical DataUnits with Electric Heat Calculating MCARPM Table ED-6. Two-Stage Electric Heat Digit 18 = U Table ED-8. Single Stage, Low kW Electric Heat Digit 18 = Table ED-7. Single-Stage, Max kW Electric Heat Digit 18 = NDimensions Weights Table DW-1. Operating Weights lbs. kgTable DW-2. Shipping Weights lbs. kg Concealed DimensionsVertical Concealed Unit Dimensions VerticalVertical Cabinet, Model B Vertical Cabinet Unit DimensionsHorizontal Concealed Unit Dimensions HorizontalHorizontal Concealed, Model C Horizontal Cabinet Unit Dimensions CabinetHorizontal Cabinet, Model D Horizontal Recessed Unit Dimensions RecessedHorizontal Recessed, Model E Vertical Wall Hung Cabinet Unit Dimensions Wall HungVertical Wall Hung Cabinet, Model F Vertical Recessed, Model H Vertical Recessed Unit DimensionsVertical Slope Top Unit Dimensions Slope TopVertical Slope Top, Model J Inverted Vertical Cabinet Unit Dimensions Inverted VerticalInverted Vertical Cabinet, Model M Inverted Vertical Recessed, Model N Inverted Vertical Recessed Unit DimensionsHorizontal Units Inverted Units CoilConnections Coil Connections Vertical UnitsFresh Air Opening Dimensions, Horizontal Units Fresh AirOpening Fresh Air Opening Dimensions, Vertical Units Continuous Mortar Ribs TOP and Bottom Wall BoxDimensions Projection Panel Projection Panel DimensionsProjection Panel Mechanical Specifications Manual Damper Electric Heat CoilFilters Fresh Air DamperMechanical Specifications Options Projection Panels False BacksRecessing Flanges Aluminum Wall BoxesPiping Components Ball Valve Manual Circuit SetterAuto Circuit Setter Strainer Control ValveBalance Fitting UnionTrane Company Division of American Standard Inc

CAB-PRC001-EN specifications

The Trane CAB-PRC001-EN is an advanced control system designed to enhance the efficiency and performance of commercial heating, ventilation, and air conditioning (HVAC) systems. This building automation system plays a crucial role in optimizing indoor climate conditions while maximizing energy savings.

One of the standout features of the CAB-PRC001-EN is its capability for real-time monitoring and control. The system integrates seamlessly with various HVAC components, allowing users to adjust settings, schedules, and operational modes from a centralized interface. This flexibility ensures that building managers can respond promptly to changes in occupancy or external weather conditions, optimizing comfort while minimizing energy consumption.

The CAB-PRC001-EN employs a robust set of advanced technologies aimed at enhancing system reliability. Utilizing adaptive control algorithms, it intelligently balances heating and cooling loads across different zones, ensuring a consistent temperature environment throughout the building. The system can quickly adapt to variable load conditions, improving energy efficiency and reducing wear on equipment.

Another defining characteristic is its commitment to user-friendly operation. The intuitive interface utilizes a clear graphical display, making navigation straightforward for users of all skill levels. Furthermore, the system can be accessed remotely through web-enabled devices, providing convenience and flexibility for building managers who are often on the move.

Integration capabilities are another hallmark of the CAB-PRC001-EN. It is designed to work with a multitude of third-party devices and protocols, enabling a comprehensive building management solution. This compatibility allows for smooth communication between different systems, including lighting, security, and fire safety systems, fostering an environment of enhanced operational efficiency.

In addition, the CAB-PRC001-EN supports advanced analytics and reporting features. Users can generate detailed reports on energy usage, system performance, and maintenance needs, enabling informed decision-making that can lead to further energy savings and improved system longevity.

In summary, the Trane CAB-PRC001-EN control system is a cutting-edge solution designed for commercial buildings, offering a combination of real-time monitoring, advanced control technologies, user-friendly interfaces, seamless integration capabilities, and powerful analytics. This makes it an ideal choice for any organization looking to enhance their HVAC operations while promoting sustainability and energy efficiency.
Top Page Image Contents