Vanguard Managed Solutions PRVYS18PWA Variable Control Operation, To Turn OFF GAS To Appliance

Page 16

VANGUARD FLAME-MAX®

UNVENTED PROPANE/LP GAS LOG HEATER

OPERATING

HEATER

Continued

VARIABLE CONTROL

OPERATION

The variable control valve can be set to any heat setting and flame height desired, by simply turning the control knob until that setting is attained. Even the lowest setting provides realistic, dancing yellow flames. Selecting higher settings produces greater heat output. This results in in- creased heating comfort.

WARNING: Do not operate heater between PILOT and HIGH positions.

CAUTION: Do not try to adjust heating levels by using the manual shutoff valve.

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1.Press in and turn control knob clock-

wise Clockwise to the HIGH position.

2.Turn the control knob clockwise Clockwise to the PILOT position.

3.Press in control knob and turn clock-

wise Clockwise to the OFF Position.

Shutting Off Burners Only (pilot stays lit)

1.Turn the control knob clockwise Clockwise to the HIGH position.

2.Press in and turn control knob clock-

wise Clockwise to the PILOT position.

MANUAL LIGHTING

PROCEDURE

1.

Follow steps 1 through 5 under Light-

 

ing Instructions, page 15.

2.

Depress control knob and light pilot

 

with match.

3.

Keep control knob pressed in for 30

THERMOSTATICALLY- CONTROLLED MODELS

FOR YOUR SAFETY

READ BEFORE

LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result caus- ing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas sup- plier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been un- der water.

LIGHTING

INSTRUCTIONS

WARNING

•If fireplace has glass doors, never operate this heater with glass doors closed. If you op- erate heater with doors closed, heat buildup inside fireplace will cause glass to burst. Also if fireplace opening has vents at the bottom, you must open the vents before operating heater.

•You must operate this heater with a fireplace screen in place. Make sure fireplace screen is closed before running heater.

NOTICE: During initial operation of new heater, burning logs will give off a paper-burning smell. Orange flame will also be present. Open damper or window to vent smell. This will only last a few hours.

Note: Homeowners generally prefer to operate their heater with the chimney damper closed. This will put all the heat into the room. However there may be times you will desire the full flames of the Hi heat setting but will find the heat output excessive. You can open the chim- ney damper (if you have one) fully or partially to release some of the heat.

WARNING: Damper handle will be hot if heater has been running.

1.STOP! Read the safety information in column 2.

2.Make sure manual shutoff valve is fully open.

3. Turn control knob clockwise Clockwise to the OFF position.

seconds after lighting pilot. After 30

seconds, release control knob. Now

follow step 8, page 15.

Ignitor Button

Control Knob

LO Pilot

 

HI

 

OFF

Figure 24 - Control Knob and Ignitor Button Location

16

104343

Page 15 Page 17
Image 16
Page 15 Page 17
Contents What to do if YOU Smell GAS Oak Log DesignLog Design Patent PendingSafety Information Vanguard FLAME-MAX Unvented PROPANE/LP GAS LOG HeaterProduct Features Product IdentificationLocal Codes UnpackingAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining Fresh AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation AIR Ventilation Air From InsideBuilding Ventilation Air From OutdoorsInstallation InstallationCheck GAS Type If Using Mantel If Not Using MantelMinimum Non-combustible Material Clearances Determining Minimum Mantel Clear- ance When using a Hood Mantel ClearancesFloor Clearances Determining Minimum Mantel ClearanceInstalling Heater Base Assembly Installing Damper Clamp Accessory for Vented OperationChimney Minimum Permanent Height ft Flue Opening sq. ins Standard Oak Log Chassis Installation Items NeededGolden Oak and Birch Model Chassis Connecting to GAS Supply Accessories,Pressure Testing Heater Gas Connections Pressure Testing Gas Supply Piping SystemChecking GAS Connections Test Pressures Equal To or Less Than 1/2 PsigFor Vintage Oak Model Installing LogsFor Golden Oak or Birch Models Operating Heater Lighting InstructionsManual Lighting Procedure Variable Control OperationTo Turn OFF GAS To Appliance Shutting Off HeaterInspecting Burners Thermostat Control OperationPilot Flame Pattern Main BurnerTroubleshooting Observed Problem Possible Cause RemedyMaintenance, Top Gas leak. See Warning statement atOptional Positioning of Thermostat Sensing Bulb For Masonry and FACTORY-BUILT Metal FireplaceSpecifications Cleaning and Maintenance Replacement PartsODS/PILOT and Burner LogsFLAME-MAX Vintage OAK Models VYS18P and VYS24P Illustrated Parts BreakdownODS Pilot Parts List VYS18P VYS24P1117 612 VYD18P, VYBD18P VYD24P, VYBD24P VYD30P, VYBD30P VYD36P Thermostatically Controlled Models VYD18PT VYD24PT VYD30PT VYD18PT VYD24PT VYD30PT VYD18PT VYD24PT VYD30PTAccessories Service HintsTechnical Service Manual Shutoff104343 Warranty Information

PRVYS18PWA specifications

Vanguard Managed Solutions PRVYS18PWA is a cutting-edge technology platform designed to revolutionize the way individuals and businesses manage their financial investments. This innovative solution combines advanced tools and features to provide a comprehensive approach to asset management.

One of the standout features of PRVYS18PWA is its intuitive user interface, which makes navigating and using the platform a seamless experience for users of all skill levels. The dashboard provides real-time insights and analytics, enabling users to track their investments’ performance easily. Powerful reporting tools are integrated, offering detailed summaries and projections that help users make educated financial decisions.

PRVYS18PWA utilizes state-of-the-art algorithms and machine learning technologies to analyze market data and trends. This feature allows users to receive personalized investment recommendations tailored to their financial goals and risk tolerance. AI-driven tools continuously learn from user interactions, ensuring that the advice provided remains relevant and up-to-date.

Security is a top priority for Vanguard Managed Solutions, and PRVYS18PWA is no exception. The platform incorporates advanced encryption protocols and two-factor authentication to protect sensitive data, ensuring that user information and financial assets are secure at all times. Users can feel confident in their transactions and the integrity of their personal information.

Another impressive characteristic of PRVYS18PWA is its integration capabilities. The platform can seamlessly connect with various financial institutions and other investment tools, allowing users to consolidate all their financial data in one place. This integration streamlines the management process and provides a holistic view of an individual’s or organization’s finances.

For those keen on sustainability, PRVYS18PWA offers various eco-conscious investment options. The platform allows users to explore socially responsible investment opportunities, aligning with personal values and promoting a positive impact on society and the environment.

Furthermore, PRVYS18PWA includes robust educational resources, ensuring users have access to the knowledge needed to make informed investments. From industry insights to market analyses and investment strategies, users can enhance their financial literacy and make more confident decisions.

Overall, Vanguard Managed Solutions PRVYS18PWA is an exceptional investment management tool that combines user-friendly design, advanced technologies, and educational resources to empower users on their financial journeys. Whether a novice investor or a seasoned professional, PRVYS18PWA offers features and functionalities to meet diverse needs and promote financial growth.
Top Page Image Contents