Jotul GF300 DV Mobile Home Installation, Fuel Conversion, Tools required, Conversion Kit Contents

Page 16

Mobile Home Installation

The GF 300 DV can be installed for use in a mobile home in the U.S. and Canada provided:

1.The stove is secured to the floor of the mobile home. Use Jøtul Floor Bracket Kit #154388.

2.Provision must be made to secure an electrical ground between the stove and the mobile home chassis.

3.The stove is installed in accordance with Title 24 CFR, Part 3280- Manufactured Home Construction and Safety Standard, in the U.S. In Canada, comply with CSA Z240.4, Gas Equipped Recreational Vehicles and Mobile Housing.

4.Always contact your local officials about installation restrictions and requirements in your area.

THIS APPLIANCE MAY BE INSTALLED AS AN OEM INSTALLATION IN A MANUFACTURED (MOBILE) HOME AND MUST BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS AND THE MANUFACTURED HOME CONSTRUCTION AND SAFETY STAN- DARD, TITLE 24 CFR, PART 3280. THIS APPLI-

ANCE IS ONLY FOR USE WITH THE TYPE OF GAS THAT IS INDICATED ON THE STOVE’S RATING PLATE. A GAS CONVERSION KIT IS PROVIDED WITH THE GF 300 DV GAS STOVE.

THIS APPLIANCE MAY BE INSTALLED IN AN AFTERMARKET PERMANENTLY LOCATED, MANUFACTURED (MOBILE) HOME, WHERE NOT PROHIBITED BY LOCAL CODES.

CET APPAREIL PEUT ETRE INSTALLE DANS UN MAISON PREFABRIQUEE (MOBILE) DEJA INSTALLEE A DEMEURE SI LES REGLEMENTS LOCAUX LE PERMETTENT. CET APPAREIL DOIT ETRE UTILISE UNIQUEMENT AVEC LES TYPES DE GAS INDIQUES SUR LA PLAQUE SIGNALETIQUE. NE PAS L’UTILISER AVEC D’AUTRES GAS SAUF SI UN KITDE CONVER- SION CERTIFIE EST INSTALLE.

Fuel Conversion

The GF 300 DV gas stove is shipped from the factory equipped to burn NATURAL GAS only. If PROPANE gas is to be used as fuel, the appliance must first be converted for use with propane. Use Propane Conversion Kit 155372, supplied with the appliance.

Order and install NG Conversion Kit 155373 to change back to use with natural gas.

WARNING:

THE CONVERSION KIT IS TO BE INSTALLED BY AN AUTHORIZED JØTUL SERVICE TECHNICIAN IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTION AND ALL CODES AND REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. THE QUALIFIED AGENCY PERFORMING THIS WORK ASSUMES RESPONSIBILITY FOR THIS CONVERSION.

IN CANADA:

THE CONVERSION SHALL BE CARRIED OUT IN ACCORDANCE WITH THE RE- QUIREMENTS OF THE PROVINCIAL AU- THORITIES HAVING JURISDICTION AND IN ACCORDANCE WITH THE REQUIRE- MENTS OF THE CAN1-B149.1 AND .2 INSTALLATION CODE.

Tools required:

1/2” open ended wrench or deep-well socket, Torx T20 or slotted screwdriver, 4 mm allen wrench.

Conversion Kit Contents:

1, regulator tower labeled for propane

3, regulator tower screws

1, burner orifice (#39 for NG, #53 for LPG)

1, pilot orifice (#51 for NG, #30 for LPG)

Label A - to be completed and applied to the back of the stove

Label B - apply to the stove’s Rating Plate

Small valve label - apply to valve body

Conversion instructions are also shipped in the stove with the conversion kit.

Open Close

Figure 22. Locate and remove the Air Shutter wingnut from under the right side of the stove.

16

Image 16
Contents Jøtul GF 300 DV Allagash Gas Heater Welcome to Jøtul Table of Contents Jøtul GF 300 DV Direct Vent Gas HeaterSuggested Tools for Installation and Service GF 300 DV SpecificationsInput Rates Unpacking your stove Hardware Bag ContentsGlass Panel Location Safety InformationHearth Requirements Alcove Installation Minimum Clearances from the Vent Pipe to CombustiblesHorizontal Run Vertical RunAdjusting Exhaust Restrictor Plate Venting RequirementsVent Restriction Exhaust RestrictorVertical Vent Termination See Fig DetailVent Windows for Natural Gas Coaxial VentVent Windows for Propane Coaxial VentCo-linear Vent Installation These installation requirements must be followedMasonry or Prefabricated Chimney Conversion Horizontal Termination Snorkel TerminationsHorizontal Termination Clearance Inches 30 cm minimumMobile Home Installation Conversion Kit ContentsFuel Conversion Tools requiredFuel Conversion Procedure Burner PlateBurner Orifice ClearancePilot orifice removal and replacement Gas Supply ConnectionGas Pressure High Altitude AdjustmentLeak test Flame Appearance / Air Shutter Adjustment Optional Wall Thermostat or Remote ControlRemote Control To adjust the air shutterLog Set Installation Install Right LogSystem Check Proper pilot flame appearanceBurner Switch and Optional Blower Controls OperationAnnual Cleaning Glass CareVent System Burner and LogsetConnect power cord to outlet Optional Blower #Blower Operation Manual or Automatic ModesOptional Antique Brick Kit Replace the Top PlateGF 300 DV Illustrated Parts Breakdown Illustrated Parts Breakdown GF 300 DV AllagashGF 300 DV Allagash Parts List 220730Name of Installer Date of PurchaseLighting Instructions Control ValveJøtul ASA Jøtul North America

GF300 DV specifications

The Jotul GF300 DV represents a blend of traditional wood stove aesthetics and modern gas technology, offering an elegant solution for homeowners looking to enhance their living spaces with warmth and style. This direct vent gas stove is designed to provide a highly efficient and convenient heating option while retaining the classic visual appeal that Jotul is well-known for.

One of the main features of the Jotul GF300 DV is its impressive heating capacity. With an output of up to 30,000 BTUs, it is capable of heating spaces ranging from small to medium-sized rooms effectively. The stove employs a dual burner system that ensures a consistent and powerful flame, delivering both radiant and convective heat that envelops the room in comfort.

Built with advanced technologies, the GF300 DV incorporates a modern ceramic glass front that allows for an unobstructed view of the flames, creating a mesmerizing focal point in any setting. The glass is designed to retain heat while minimizing soot build-up, ensuring that the glass remains clean and clear, and allowing for a captivating view of the fire. This model also features an adjustable flame height and heat output, giving users control over their heating needs and ambiance.

The stove's direct venting system is a standout characteristic, providing optimized safety and efficiency. It draws air for combustion from the outside, significantly improving indoor air quality by preventing drafts and eliminating the need for chimney flues. This makes the GF300 DV not only a more environmentally friendly option but also a safer alternative for homes, especially in tighter, more energy-efficient spaces.

To enhance user convenience, the Jotul GF300 DV is equipped with a programmable thermostat and remote control option. This allows homeowners to set their desired temperature and schedule heating times, resulting in energy savings and tailored comfort. Additionally, the stove's compact size and stylish design make it versatile enough to fit into various room layouts, whether as a primary heating source or as an accent piece in a cozy living room.

In summary, the Jotul GF300 DV is an ideal choice for anyone looking to merge aesthetic elegance with modern heating technology. Its combination of high efficiency, superb heat output, and user-friendly features, along with stunning visual appeal, makes it a noteworthy addition to any home.