Jotul GF300 DV manual Alcove Installation, Minimum Clearances from the Vent Pipe to Combustibles

Stove and Vent Clearance Requirements

Minimum Clearances from the Stove to Combustibles: See figs. 2-4.

Rear:	2” (51 mm)
Ceiling:	33” (838 mm)
Corner:	2”	(51 mm)
Right Side:	3”	(76 mm)
Left Side:	10” (254 mm) - for access to Lighting Instruction plate

10” *

(254 mm)

Left Side

2”

(51 mm)

To Rear Wall

3”

(76mm)

Right Side

Minimum Clearances from the Vent Pipe to Combustibles:

Horizontal Run:
Off the top of the pipe 2”		(50 mm)
Off the sides and bottom 1”		(25 mm)
Vertical Run:
All sides	1” (25 mm)

Minimum Ceiling or Alcove Height

			Max. Mantel Depth
			12.5”
			10.25”
			8”
			5.75”
			Min. Mantel Depth	3.5”
61” 1550mm	551/2” 1410mm		Max. Top Trim Depth = 1”
				18 1/2”
				(419 mm)
	58 1/2” 1486 mm	54” 1372 mm	46 1/2” 1182 mm
	57” 1449 mm	52 1/2” 1334 mm		28” 711 mm

Figure 2. Mantel and Trim Clearance specifications. Subtract 2 1/4” with Short Legs.

*Allow 10” on left side of the appliance for complete access to the lighting instructions and control valve.

Figure 3. Parallel Installation Clearances.

	11”
	280 mm
2”	11”
51 mm	280 mm
	2”
	51 mm

Figure 4. Vent adaptor centerline at minimum clearance to corner walls.

Alcove Installation

Maximum Alcove Depth:	24” (610 mm)
Minimum Alcove Width:	36 3/4” (934 mm)
Minimum Ceiling Height:	61” (1549 mm)
With Short Legs (6”):	58 3/4 (1486 mm)

7