Jotul GF300 BV Minimum Clearances from the Vent Pipe to Combustibles, Minimum Alcove Dimensions

See figs. 2-3.

Stove and Vent Clearance Requirements

Minimum Clearances from the Stove to Combustibles

Rear:	2” (51 mm) - measured from Draft Hood
Ceiling:	32 1/4” (819 mm) - measured from stove top
Corner:	3”	(76 mm) - measured from stove top
Sides:	3”	(76 mm - measured from stove top)

2”

(51 mm)

To Rear Wall

3”	3”
(76 mm)	(76 mm)

Minimum Clearances from the Vent Pipe to Combustibles

Horizontal Run:
Top: Off the top of the pipe	2” (50 mm)
Sides: Off the sides and bottom	2” (50mm)

Vertical Run:

All sides: 1” (25 mm)

All vent components must be installed in accordance with the manufacturer’s instructions and within the terms of their listing. Refer to the manufacturer’s instructions for approved clearances from the vent pipe to combustible materials.

Minimum Alcove Dimensions

Maintain clearances to combustibles as noted above.

Width:	36” (914 mm)
Depth:	24”	(610 mm)
Height:	61”	(1550 mm)

Figure 2. Parallel Installation Clearances.

	11 3/4”
	(298 mm)
3”	34”	11 3/4”
(76 mm)
	(864 mm)	(298 mm)
	3”
	(76 mm)

Figure 3. Vent adaptor centerline at minimum clearance to corner walls.

Mantel Clearances - Stove shown with standard legs. With Short Legs, subtract 2 1/4” (51 mm) from the clearances indicated below.

Max. Mantel Depth

11.5”
9.5”
7.5”
5.5”
3.5”	Min. Mantel Depth

Max. Top Trim

Depth = 1”

1”

11” (266 mm)

Mantel Depths		Mantel Sheild:
	as in Fig.4.	Min. 24 ga. steel
		26” wide on 1”
		spacers
	No Top Trim

56 3/4”	53 3/4”		50 3/4”
1441 mm	1365 mm		1289 mm
55	1/4”	52 1/4”		27 3/4”
1403 mm		1327 mm		705 mm

44	1/4”	41	1/4”	38	1/4”
1124 mm		1047 mm		972 mm
	42 3/4”		39 3/4”
						27 3/4”
	1086 mm		1010 mm			705 mm

	Max.
6		1/2”
165 mm

Figure 4. Mantel and Trim specifications -	Figure 4a. Mantel specifications -
Stove installed flush with fireplace face.	Stove recessed into fireplace no more than 6 1/2”.

7