OUTSIDE AIR KIT INSTALLATION
FOR PEDESTAL MODELS
(1) Front Cover
(1)Rear Intake Cover (1 ) Rodent Screen
(6)
TOOLS AND PARTS
NEEDED:
#2 Phillips Screw Driver, suf- ficient quantity of metalflex or rigid pipe for your connection purposes, silicone sealant.
FIGURE 19 |
FLOOR INSTALLATION: (See Figure 19)
1.Cut a hole in the floor to accommodate outside air piping.
2.Run piping and install rodent screen to the outside end of piping.
3.Install rear cover and front cover with
4.Seal between the floor and pipe with silicone to prevent moisture penetration.
5.Slide stove into position.
WALL INSTALLATION: (See Figure 19)
1.Cut a hole in the outside wall to accommodate outside air piping.
2.Run piping and install rodent screen.
3.Install rear cover and front cover with
4.Slide stove into position and adjust piping.
5.Seal between the wall and pipe with silicone to prevent moisture penetration.
FOR LEG MODELS
(1) Front Cover
(1)Rear Intake Cover (1 ) Rodent Screen
(4)
TOOLS AND PARTS NEEDED:
#2 Phillips Screw Driver, suf- ficient quantity of metalflex or rigid pipe for your connection purposes, silicone sealant.
FIGURE 20 |
FLOOR OR WALL INSTALLATION:
(See Figure 20)
1.Cut a hole in the floor or wall to accommodate outside air piping.
2.Run piping and install rodent screen to the outside end of piping.
3.Install rear cover and front cover with
4.Slide stove into position and adjust piping.
5.Seal between the floor and pipe, or wall and pipe with silicone to prevent moisture penetration.
16